01-389-9992
Bearing And Bushing Inserter
1.220" overall length dia. size: lg 1.750in. x 1.480in. x 1.120in.; use with j-B092 drive handle; pilot bearing installer; zinc plated finish
01-390-0431
Spanner Wrench
7.000" overall length 2.280" overall width face hole
01-390-1104
Bearing And Bushing Inserter
Used on allison md 3070 transfer case.
01-390-1463
Spanner Wrench
01-390-3247
Hydraulic Hand Jack
C-17a support equipment; fixture, aircraft maintenance-draw bar
01-390-4160
Electronic Equipm Alignment Tool
Used on 5865-01-352-4197 jamming systems, comm. trimming tool for 4
01-390-4164
Socket Head Screw Key Set
6.000" overall length
01-390-4165
Socket Wrench Socket
Used on an/alm-233.
01-390-4661
Mechanical Puller
Motor pump coupling withdrawal tool; includes strongback, stud, nut 3/8 - 16 unc, washer
01-390-4662
Terminal Crim Contact Positioner
01-390-4977
Wrench Face Spanner Socket
Passivated stainless steel; 4.00 in x 1.00 in dimension; 1 in hex style; pacer special
01-390-5069
Screw Hand Jack
01-390-5083
Mechanical Puller Attachment
01-390-6739
Box Wrench
14.000" overall length wrench offset
01-390-7243
Torque Wrench Adapter
Used on c117 troop entry door.
01-390-7570
Multiposition Vise
Used on nsn 2815-01-350-2207, diesel engine. used with bracket 157944-7820
01-390-7571
Ratchet Wrench
25 deg offset chromium surface treated straight double head
01-390-7574
Spanner Wrench
Used on nsn 2815-01-350-2207, diesel engine. for holding sa type timing device
01-390-7575
Ratchet Wrench
25 deg offset chromium surface treated straight double head
01-390-7577
Spanner Wrench
Used on nsn 2815-01-350-2207, diesel engine. for holding sa, sg type timing device (installed with laminated coupling)
01-390-7578
Ratchet Wrench
25 deg offset chromium surface treated straight double head
01-390-7582
Ratchet Wrench
25 deg offset chromium surface treated straight double head
01-390-7583
Ratchet Wrench
25 deg offset chromium surface treated straight double head
01-390-7584
Ratchet Wrench
25 deg offset chromium surface treated straight double head
01-390-7585
Ratchet Wrench
25 deg offset chromium surface treated straight double head
01-390-7638
Screw Hand Jack
01-390-7697
Mechanical Puller Set
Used to remove
01-390-7926
Electrical Inserter And Remover
Used on amphenol series 482 connectors.
01-390-7927
Pliers
4.750" overall length
01-390-7928
Craftsman's Tweezers
4.375" overall length glass filled delrin; thin flat points general purpose
01-390-7937
Socket Head Screw Key
6.800" overall length ball end l-handle
01-390-9168
Torque Wrench Adapter
Wrench
01-390-9193
Wrench Face Spanner Socket
01-390-9212
Drill Guide
Used on f404 engine.
01-390-9346
Electrical Connector Inserter
Permits use of each shell size socket with any polarization
01-390-9397
Mechanical Puller
01-391-0413
Crimping Tool Die
01-391-0494
Tube Hand Swaging Tool Kit
9.000" overall length 18.000" overall width
01-391-0646
Mechanical Puller
Used on tf-117-pw100 acft eng. pusher; steel: c frame, jackscrewmachined plug; 1.2 x 1.8 x 4.5 in.
01-391-0647
Mechanical Puller
Used on tf117pw100 acft eng. consists of a steel c frame, steel jackscrew,
01-391-0676
Electrical Connector P Extractor
Used on general purpose. the extraction tip is designed toenter the lance recess in the front ofthe huusing
01-391-0697
Drill Guide
Used on f117-pw-100 acft eng. drill fixture; 12.0 h x 30.0 in. sqr
01-391-1134
Final Drive Assemb Alignment Pin
Used on f117-pw-100. deflector pin isteel pin which is threaded on one end
01-391-1285
Screwdriver Bit
01-391-1295
Screwdriver Bit Set
01-391-2401
C Clamp
Carver type
01-391-2948
Box Wrench
Used on f117-pw-100. used to secure the retaining nutsduring the assembly of the no. 3 bearing oil nozzle
01-391-3541
Bearing And Bushing Inserter Set
Used on allison series md transmissions.
01-391-4175
Mechanical Puller Adapter
Pressure screw adapter for use when snap-on no. CG450 puller is used as pusher male to female
01-391-4502
Electrical Connector Inserter
Plug holder; steel/electroless nickel; length 1.031 in; width 0.803 in; height 0.954 in; torque 120 in/lb
