01-386-4480
Caulking Gun Nozzle
Used on model 850.
01-386-5397
Spanner Wrench
Used on engine,diesel p/n 16-251-b onboard 210 ft wmec cg vessels. used for fuel booster
01-386-5955
Socket Wrench
Spanner, complete, for cap nut
01-386-5988
Socket Wrench Socket
Axle yoke nut socket
01-386-5999
Socket Wrench Socket
Axle yoke nut socket
01-386-6360
Flexible Cable Term Swaging Tool
01-386-6384
Spanner Wrench
Used on vtr 454 turbocharger. tool, box
01-386-6396
Socket Head Screw Key
Used on vtr 454 turbocharger. tool, box
01-386-6729
Spanner Wrench
5.000" overall length 4 slot wrench; used with pneumatic controllers
01-386-7159
Leveling-support Jack
Used on an/mpn-14k; 5895-01-269-3572. weight: 75 lbs; automaticlatch to be provided to prevent rotation of jack screw due to vibration; a 12 inch removable crank
01-386-7160
Mechanical Puller
Used on engine assembly; tf117 pw100.
01-386-7190
Mechanical Puller
Used on but not limited to the f117-pw-100.
01-386-7601
Torque Wrench
01-386-7688
Torque Wrench Adapter
Used on f100 turbofan engine. wrench may also be used when external flaps have been removed
01-386-7689
Driftpin
Used on multiple acft. 8.500" overall length
01-386-7803
Mechanical Puller
Used on f117-pw-100. pusher, screwjack
01-386-7876
Mechanical Puller
Used on f100pw100/200/220. puller, 2nd stage compressor blades slide hammer, gear
01-386-8629
Terminal Hand Crimping Tool
01-386-8812
Torque Wrench Adapter
Used on but not restricted to thef117-pw-100.
01-386-8847
Bearing And Bushing Inserter
Used on 117 engine assembly, tf117 pw100. drift, seating - hpt balance arbor bearing, front
01-386-8859
Bearing And Bushing Inserter
PWA81298 drift is steel
01-386-9142
Bucking Rivet Bar
Used on f117-pw-100. riveting anvil 0.8 in dia x 2.5 in length; name on dwg anvil; backup-hp turbine, 1st stage blade rivet, orbital riveting; required to provide positive pressure against the rivet head during the riveting operation of the first stage turbine blades
01-387-0055
Open End Box Wrench
7.500" overall length wrenching end offset angle 15 deg.; width .660in.; 12 point; offset height 2in.; flare nut tube wrench
01-387-0245
Screwdriver Bit
1.312" overall length extra hard heat treatment
01-387-0249
Screwdriver Bit
1.125" overall length extra hard heat treatment
01-387-0256
Screwdriver Bit
3.250" overall length yankee drive; extra hardness
01-387-0266
Screwdriver Bit
3.250" overall length yankee drive
01-387-0278
Screwdriver Bit
1.000" overall length limited clearance type
01-387-0622
Bucking Rivet Bar
01-387-0656
Bucking Rivet Bar
01-387-0790
Bucking Rivet Bar
01-387-0805
Square Tip Screwdriver
01-387-0841
Bucking Rivet Bar
01-387-0850
Torque Wrench
01-387-0930
Bucking Rivet Bar
01-387-2646
Screw Hand Jack
Used on hawk, improved, surface to air missiles.
01-387-3304
Float
Used on hobart dishwashers.
01-387-4377
Socket Wrench Socket
Jam nut type; fits 1.137 to 1.175 in. jam nut internal-internal
01-387-4462
Socket Wrench Socket
Jam nut type; fits 1.633 to 1.688 in. jam nut internal-internal
01-387-4611
Seal Inserter
Used on f-15a/b/c/d/e
01-387-4703
Socket Wrench Socket
Jam nut type; fits 0.741 to 0.765 in. jam nut internal-internal
01-387-5126
Socket Wrench Socket
Jam nut type; fits 0.845 to 0.873 in. jam nut internal-internal
01-387-5435
Socket Wrench Socket
9.250" overall length in accordance with u.s. army tank-automotive command drawing number 12369972, revision b, dated 9/2/1994 universal joint
01-387-5473
Mechanical Puller
Used on f117pw100 engine. dim.: 20.5 in. lg, remover end 1.0 in h x 2.0 in w
01-387-5545
Terminal Hand Crimping Tool
01-387-5774
Socket Head Screw Key
9.000" overall length 3.000" overall width looped handle oxide surface treated fixed t-handle
01-387-6541
Torque Wrench
01-387-6679
Open End Wrench
01-387-7275
Mechanical Puller Adapter
Hthis adapter is required during removal of the seventh stage disk
