01-381-1459
Torque Wrench Adapter
01-381-1462
Seal Inserter And Remover
01-381-1619
Hand Hammer
Used on nsn 5180-00-900-8559 light engineer squad tool set. 14.000" overall length polypropylene jacketed handle; olive drab color tack, claw head
01-381-1688
Spanner Wrench
01-381-1692
Mechanical Puller
Used on mortar 81mm. three jaw grip
01-381-2363
Electronic Inserter And Remover
Used on cass test station an/usm636(v1/2/3/4);rtcass-anusm702. 5.000" overall length (navy) pin dip insertion tool aircraft maintenance 24/28 dual inline package (dip) insertion tool; for integrated circuits inserted into sockets; friction fit hollow jaw
01-381-2369
Mechanical Puller Attachment
Used on ground and airborne gas turbine engines, auxiliary power units, accessories and parts.
01-381-2371
Open End Wrench
Used on c-2a peculiar components.
01-381-2373
Mechanical Puller Attachment
Used on ground and airborne gas turbine engines, auxiliary power units, accessories and parts.
01-381-2761
Socket Wrench Socket
01-381-2762
Torque Wrench
01-381-3220
Torque Wrench
Used on acft model f14.
01-381-3237
Mechanical Puller
Used on engine model t34.
01-381-3579
Torque Wrench Adapter
Torque adapter is a steel multi detail assy consisting of a tee shaped welded guide plate with (1) each boltsnuts,
01-381-3599
Torque Wrench Adapter
Adapter consists of a hardened tool steel assy with external splines OF5.171 in.outside diameter
01-381-4511
Cross Tip Screwdriver
01-381-4534
Cross Tip Screwdriver
01-381-4601
Torque Wrench
01-381-4620
Spanner Wrench
01-381-4699
Cross Tip Screwdriver
01-381-4811
Open End Wrench
Used on f100-220 turbofan eng. single head, 5 in. lg, head is atapprox 45 deg angle to handle
01-381-5292
Open End Wrench
35.125" overall length single head
01-381-5321
Mechanical Puller
Used on engine model j400.
01-381-6013
Retaining Ring Pliers
Washer retaining tool required to retain fan tiebolt washer during assy/disassy operations.engine assy tbfan F100-pw-229
01-381-6309
Socket Head Screw Key
Cadmium surface treated l-handle
01-381-7034
Mechanical Puller
Tool used for maintenance on F117-pw-engine assy. puller consists of asteel, twp piece, clam shell weldment w/ two slide hammer assys atch. lock ing device consists of a swing bolt, washer,
01-381-7301
Terminal Hand Crimping Tool
0.380 in. die width; o/a lg 8 ins.; forged steel frame with orange plastisoled handles
01-381-7309
Connector Fibe Installation Tool
Used on nsn 6080-01-377-5857 fiber optic cable splicing kit.
01-381-7316
Terminal Hand Crimping Tool
Used on mil-c-22520/10-01 hex crimp assembly kit.
01-381-8782
Screwdriver Bit
01-381-9481
Mechanical Puller
Used on engine assembly tf117 pw100. the low pressure turbine hub
01-381-9495
Hydraulic Hand Jack
Used on engine assembly tf117 pw100. the gearbox group must be handledduring removal from
01-382-0127
Screw Hand Jack
Used on engine assembly tf117 pw100. 8the following flanges within the gearbox group must be separated disassembly: the oil pump drive housing, theangle gearbox assembly, the radial drive lower bearing housing, the integrated drive generator system housing, andthe starter drive housing
01-382-0220
Screwdriver Bit
01-382-0894
Mechanical Puller Attachment
Used on t-700 engine.
01-382-1453
Torque Wrench Adapter
01-382-1626
Splicing Sleeve Compressing Tool
01-382-2675
Mechanical Puller
Puller jaw set consists of a steel plate, a steel retaining ring, threesteel washer
01-382-2742
Socket Wrench Socket
01-382-2807
Rotating Members Aligning Tool
Used on ground power generator cart, a/m32a-102.
01-382-3163
Screw Extractor
01-382-3768
Spanner Wrench
2.330" overall length cadmium surface treated tubular blade
01-382-3793
Torque Wrench
12.500" overall length dual scale; 20 kgcm graduations chromium surface treated rigid frame end drive
01-382-4038
Torque Wrench
Used on 6625-01-259-1060 analyzer, spectrum.
01-382-4285
Spanner Wrench
01-382-4700
Crimping Tool Die
01-382-5857
Spanner Wrench
Used on 4820-00-541-5696 valve, gate. chromate zinc surface treated
01-382-6775
Torque Wrench Multiplier
01-382-7800
Terminal Crim Contact Positioner
