01-261-6062
Wrenching Tube Fitting Socket
1.375" overall length 1.187" outside diameter for use with weatherhead fittings chromium surface treated open side
01-261-6063
Wrenching Tube Fitting Socket
1.375" overall length 1.250" outside diameter open side
01-261-6773
Electron Tube Extractor
01-261-6873
Slip Joint Pliers
10.062" overall length comfort grip handles; straight serrated jaws; 5 jaw positions; 1-29/32 in. jaw capacity
01-261-8034
Electrical Contact Remover
01-261-8113
Socket Head Screw Key
Used on C-5B. used to facilitate disassembly of the air compressor piston
01-261-9909
Socket Wrench Socket
2.125" overall length chromium surface treated
01-262-0451
Cable Woven Grip
36.000" overall length
01-262-1486
Mechanical Finger
St.stl matl, 6.2 in.lg, 2.38 in.w, 3.55 in.h; e/i KC135
01-262-1487
Seal Inserter
3.500" overall length
01-262-1488
Seal Inserter
2.630" overall length
01-262-1489
Seal Inserter
2.000" overall length
01-262-1490
Seal Inserter
4.065" overall length
01-262-1491
Seal Inserter
2.000" overall length
01-262-1492
Seal Inserter
2.750" overall length
01-262-2006
Mechanical Puller
Used to remove bellows
01-262-2007
Mechanical Puller
Slide hammer tool, has male engagement portion 0.375 in. dia; used to remove pcr regulator
01-262-2008
Mechanical Puller
Used to remove orifice assy, F108 mec
01-262-2009
Mechanical Puller
Used for removal of cup fm governor flyweight assys; is 2 legged w/expanding jaw pushe/puller; jaw controlled by knob on thd rod; matl 410 s.stl
01-262-2010
Seal Inserter
Used to size seals
01-262-2011
Seal Inserter
To size packing seal
01-262-2012
Seal Inserter
2.590" overall length
01-262-2013
Seal Inserter
2.000" overall length
01-262-2278
Open End Wrench
Medical repair part for 6515012533854; sphygmomanometer; fscm 0ABF3 part no. S6; wrench, open end; recalibrated manomater wrench; fits into two indentations on the base of the guage around the gauge nipple; turning the gauge nipple will move the position of the needle for calibration
01-262-2782
Seal Inserter
2.000" overall length used to aid in the installation of the packing onto the push rod, weighs approx. .008 lbs.
01-262-2783
Seal Inserter
2.500" overall length used to aid in the installation of the packings
01-262-2784
Seal Inserter
2.250" overall length used to aid in the installation of the packing into the plug groove, approx. weight is .027 lbs.
01-262-2785
Seal Inserter
2.000" overall length used to aid in the installation of the packings
01-262-3971
Spanner Wrench
5.562" overall length 0.840" outside diameter
01-262-3972
Socket Wrench Socket
2.125" overall length chromium surface treated
01-262-6544
Mechanical Puller
01-262-6590
Tube Hand Flaring Tool
01-262-7304
Seal Inserter
Used on cummins engines.
01-262-7306
Oil Filter Wrench
Used on cummins engines.
01-262-7315
Piston Ring Compressor
Used on cummins series k engines.
01-262-7316
Piston Ring Compressor
01-262-7319
Box Wrench
9.600" overall length chromium surface treated 19 double offset single head
01-262-7321
Box Wrench
Chromium surface treated
01-262-9265
Electrical Contact Remover
01-262-9960
Socket Wrench Socket
49.0mm overall length chromium surface treated internal-internal
01-263-0138
Seal Inserter
Used on cummins series k engines.
01-263-1528
Bearing And Inserter And Remover
01-263-2297
Spanner Wrench
4.750" overall length oxide surface treated
01-263-2308
Putty Knife
Semi-flexible blade
01-263-3629
Spanner Wrench
6.875" overall length iaw union flonetics drwg nbr. A50836, dated 2/17/1986
01-263-3644
Crimping Tool Die
Used on KC-135.
01-263-4527
Mechanical Puller
Size 1.6 in. x 1.6 in. x 5.5 in.; matl steel; black oxide fin slide hammer, gear
01-263-4528
Mechanical Puller
13.9 in. by 2.3 in. dia; matl steel, black oxide fin; e/i c-17 acft
01-263-4529
Pin Inserter And Remover
15.000" overall length 0.93 in. w, 1.5 in. h; black oxide fin; e/i F101 engine
