01-245-8398
Mechanical Puller
Matl carbon steel, finish black oxide; 12.75 in. high, 5.25 in. dia; u/o e/i F112 engine
01-245-8399
Mechanical Puller
Item shpe sissor like arms
01-245-9987
Spanner Wrench
Tool is 1.345 in. dia by 3.0 in. lg
01-245-9988
Torque Wrench Adapter
Used on b1-b acft. item is 8.0 in. dia, 0.5 in. thk., torque nuts to 240-265 ft/lb; u/o sru actuator assy
01-246-0243
Box And Open End Combinat Wrench
17.438" overall length o/a length: 17.438" (+/-0.250 in.) oxide surface treated 63 offset
01-246-1745
Bearing And Bushing Inserter
4.250" overall length black oxide finish; u/o F112 engine
01-246-1746
Seal Inserter
2.000" overall length
01-246-3033
Seal Inserter
3.000" overall length 1-1/2 in. inside dia
01-246-3038
Push-pull Screw Jack
01-246-3071
Socket Wrench
6.750" overall length
01-246-5808
Socket Wrench
01-246-6098
Bearing And Bushing Inserter
Used on nsn 2420-01-160-2754 tractor. 90mm dia at one end, 72mm dia at other
01-246-6099
Bearing And Bushing Inserter
Used on nsn 2420-01-160-2754 tractor. 35.0mm overall length 92mm dia at one end, 75mm dia at other
01-246-6113
Electronic Equipm Alignment Tool
4.938" overall length nylon; 0.085 in. width blades at both ends, one end recessed
01-246-6644
Open End Box Wrench
Used on daimler benz vehicles om 314,326,327,360,346,355,400,352. 220.0mm overall length
01-246-6706
Mechanical Puller
Used on mercedes benz diesel engines.
01-246-6840
Spanner Wrench
01-246-7343
Spanner Wrench
01-246-8362
Blind Hand Riveter
01-246-8363
Blind Hand Riveter
01-246-8364
Blind Hand Riveter
01-246-8852
Spanner Wrench
Used on kc-135r. used when overhauling the ignition exciter to unscrew
01-246-9195
Leveling-support Jack
01-246-9196
Leveling-support Jack
01-246-9250
Mechanical Puller
Used on nsn 2420-01-160-2754
01-246-9259
Leveling-support Jack
Used on 7360-00-138-7782; 7360-01-092-0470,7360-01-155-6020 kitchen,field,trailer mounted.
01-246-9859
Torque Wrench Multiplier
19.800" overall length
01-246-9940
Mechanical Puller
Bmatl: jaws bearing
01-247-0004
Mechanical Puller
01-247-0005
Mechanical Puller
Used on nsn 2420-01-160-2754
01-247-0756
Mechanical Puller
Used on nsn 2420-01-160-2754
01-247-1636
Crimping Tool Die
Used on amp inc. no. 1752787-1, 1742877-1, 58422-1 and 69066 hydraulic crimp heads.
01-247-1639
Caulking Gun Nozzle
01-247-1990
Pin Remover
Used to locate piston while pressing out the pin that holds the piston to the rack in the cit sensor; consists of low carbon steel
01-247-2895
Mechanical Puller
Used to install or remove the electronic components assembly - tgg wheel power supply; disassembly fixture is 4.0 in. wide, 2.875 in. high, 3.75 in. long assy of welded stainless steel rod, aluminum plate
01-247-2896
Bearing And Bushing Inserter
Item is a cylindrical tool 7 in. long
01-247-3457
Blind Hand Riveter
01-247-3770
Ratchet Wrench
11.438" overall length
01-247-3782
Mechanical Puller
End item 2420-01-160-2754
01-247-4097
Spanner Wrench
Used on b-1b acft. used for removal
01-247-4098
Spanner Wrench
Used to lower
01-247-4099
Box Wrench
Tool provides access to the lightning strap nut during mating of stage ii motor; engages a 3/8 in. hex nut
01-247-4100
Torque Wrench Adapter
Used on kc-135r acft. used to connect the conduit assembly to the box assembly; measures 2 5/8 in. long, 1 3/4 in. wide
01-247-4207
Screwdriver Bit Holder
For adapting cooper utica miniature torque screwdriver accessories to standard model torque screwdrivers
01-247-4551
Mechanical Finger
Item has tubing at one end
01-247-4552
Mechanical Puller
Consists of three parts, each made from stainless steel; used to pull back
01-247-4553
Bearing And Bushing Inserter
Used to install a bushing into the bore of the speed trim
01-247-4742
Socket Wrench
6.000" overall length plastisol coated handle single socket offset
