01-244-3289
Socket Wrench Handle
20.438" overall length oxide surface treated sliding t
01-244-5736
Brick Jointer
V-style sled runner; 14 in. lg; 3/4 in. width at ends; wood handle
01-244-9367
Socket Wrench
Used on warren 14x12x24 vert single piston pump. 15.812" overall length
01-244-9368
Socket Wrench
27.120" overall length single socket t
01-244-9821
Wrench Face Spanner Socket
Cadmium surface treated lug
01-244-9840
Pneumatic Tire Valve Repair Tool
01-244-9985
Electrical Conduit Hand Bender
Heavy duty handle permenently welded to cast steel head; 48 in. lg
01-245-0813
Spanner Wrench
Lug
01-245-1338
Terminal Hand Crimping Tool
11-7/8 in. o/a lg
01-245-2360
Socket Wrench Socket
47.0mm overall length chromium surface treated universal joint
01-245-2361
Socket Wrench Socket
47.0mm overall length chromium surface treated universal joint
01-245-2364
Plier Clamp
Toggle type; 3 in. jaw capacity; furnished with two 3/8-16 adjustment spindles; two-way trigger release; 700 lbs holding pressure
01-245-2470
Wrench Face Spanner Socket
0.950" overall length 1.820" outside diameter cadmium surface treated lug
01-245-2507
Grommet And Eyelet Hand-op Press
01-245-2515
Ratchet Lever Cable Type Puller
01-245-4347
Socket Head Screw Key
Used on 6525-01-099-2320 x-ray apparatus,portable model; heliodent 70,with d31.52. 8.431 in. lg; 1.000 in. w; 0.120 in. dia
01-245-4771
Socket Head Screw Key
199.0mm overall length ball end oxide surface treated screwdriver handle
01-245-5040
Terminal Hand Crimping Tool
Used on turbofan engine. used to crimp various size tube seals; is 10.5 in. lg, 1.75 in. wide; e/i u/o turbofan engine
01-245-5043
Mechanical Puller Attachment
U/o 5120-01-174-5704; e/i F100 engine
01-245-5267
Spanner Wrench
7.500" overall length lug
01-245-5268
Socket Wrench
Used on 2420-01-160-2754. 300.0mm overall length
01-245-5271
Electrical Conduit Hand Bender
Heavy duty handle permanently welded to cast steel head; 42 in. lg
01-245-5313
Drill Guide
Used on mk48 torpedo workshop equip.
01-245-6224
Torque Wrench
01-245-6976
Spanner Wrench Set
Used on general electric lm2500 engine.
01-245-7161
Socket Wrench Handle
10.250" overall length 1.625" overall width ratchet
01-245-7304
Socket Wrench
13.000" overall length u/o e/i F112 engine oxide surface treated
01-245-7305
Torque Wrench
Used on f112 engine. o/a lg 7.5 in., handl 6.0 in. lg, head is 1.5 in., center socket is 1.0 in. dia; handle oxide surface treated
01-245-7464
Retaining Ring Installation Tool
4.500" overall length matl carbon steel, black oxide fin; 0.625 in. dia; u/o e/i F112 engine
01-245-7467
Mechanical Puller
Consists of collar inst tool, lock ring puller, split spline tool
01-245-7468
Mechanical Puller
Lg 10.75 in.; height 3.5 in.; matl stressed relieved alum, black oxide finish; u/o F112 engine gear
01-245-7469
Mechanical Puller
2.0 in. lg, 2.5 in. dia; u/o e/i F112 engine steering gear arm
01-245-7470
Mechanical Puller
8.5 in. high, 3.125 in. dia; u/o e/i F112 engine steering gear arm
01-245-7471
Mechanical Puller
8.0 in.high, 2.125 in. dia, matl plain carbon steel; black oxide finish; u/o e/i F112 engine steering gear arm
01-245-7472
Mechanical Puller
Matl carbon steel, black oxide finish; height 12.0 in., width 2.625 in. gear
01-245-7473
Mechanical Puller
7.75 in. lg, 2.75 in. dia, matl carbon steel; u/o e/i F112 eng gear
01-245-7474
Mechanical Puller
Matl carbon steel, black oxide fin, height 4.0 in., dia 2.0 in.; u/o e/i F112 engine slide hammer, gear
01-245-7475
Mechanical Puller
Height 6.5 in., width 4 in., matl carbon steel, fin black oxide, u/o e/i F112 engine gear
01-245-7476
Mechanical Puller
Matl carbon steel, finish black oxide; 4.5 in. high, 4.0 in. dia; u/o e/i F112 engine steering gear arm
01-245-7477
Mechanical Puller
Matl carbon steel, jaws flame hardened, fin. black oxide, 3.75 in. high, 3.5 in. dia, reach 1.25 in; u/o e/i F112 engine wheel hub
01-245-7480
Seal Inserter
7.000" overall length
01-245-7481
Seal Inserter
3.000" overall length
01-245-7482
Seal Inserter
2.375" overall length part of p/n aks-14404
01-245-7483
Seal Inserter
3.000" overall length u/o e/i TF39-ge-1c
01-245-7484
Bearing And Inserter And Remover
4.500" overall length e/i o/u F112 engine
01-245-7485
Bearing And Inserter And Remover
2.500" overall length
01-245-7546
Socket Wrench
Used on 4320-01-186-3377. 4.375" overall length handle is l shaped; 1.50 in. short arm lg, 4.25 in. long arm lg; round, 1/4 in. dia oxide surface treated
01-245-7547
Socket Wr Screwdriver Attachment
01-245-8397
Mechanical Puller
Matl mild carbon steel w/reach
