01-201-1380
Hammer Handle
15.000" overall length replacement handle for snap-on no. BP20b ball peen hammer
01-201-3055
Pipe Wrench
18.000" overall length
01-201-3228
Spanner Wrench
6.625" overall length 2.562" outside diameter 9 in. handle tubular pin
01-201-3257
Electrical Contact Remover
01-201-5438
Socket Head Screw Key
Guide set on both ends oxide surface treated l-handle
01-201-5439
Socket Head Screw Key
Guide set on both ends oxide surface treated l-handle
01-201-5440
Socket Head Screw Key
Guide set on both ends oxide surface treated l-handle
01-201-7021
Electrical Contact Remover
For removing pin
01-201-7022
Seal Inserter
Used on omc outboard motor.
01-201-7341
Leveling-support Jack
Used on 4320-01-175-3933, water distribution equipment.
01-201-7857
Mechanical Puller
Consists of 1 ea of the following 3 component ranges: 1-2"; 2-3";
01-201-7871
Bearing And Bushing Remover
9.000" overall length
01-201-7872
Mechanical Puller Attachment
Used on end item is tank ; nsn 2350-01-087-1095 ; model m1a1.
01-201-7874
Mechanical Puller Attachment
Used on end item is tank ; nsn 2350-01-087-1095 ; model m1a1.
01-201-8302
Bearing And Bushing Inserter
2.000" overall length
01-201-9098
Socket Head Screw Key
Guide set on both ends oxide surface treated l-handle
01-201-9099
Socket Head Screw Key
Guide set on both ends oxide surface treated l-handle
01-201-9100
Socket Head Screw Key
Guide set on both ends oxide surface treated l-handle
01-201-9101
Socket Head Screw Key
Guide set on both ends oxide surface treated l-handle
01-201-9733
Socket Wrench Extension
10.000" overall length 0.490" outside diameter chromium surface treated rigid
01-201-9735
Screw Hand Jack
01-202-0706
Socket Wrench
20.000" overall length iaw trident refit facility drawing number trb-6110-020-94, dated 17 jun 94 plastic surface treated
01-202-1709
Socket Wr Screwdriver Attachment
Used on xm2 and xm3 vehicles. 6.680" overall length 187c hexagon
01-202-2190
Spanner Wrench
Used on steam catapults. four arm plate with 6 pins on 2-7/8 in. dia bolt circle; 1-1/2 in. hex head drive/pilot bar
01-202-2210
Bearing And Inserter And Remover
Used on omc johnson 9.9, 15, 35, 50, 55, 60, 70 and 75 hp, v-4, v-6, 400 and 800 model sterndrives.
01-202-2211
Bearing And Bushing Inserter
Used on omc 1975-77 50 and 55 hp, 1975-77 hp (short shaft) outboard engines.
01-202-3543
Torque Wrench
01-202-3934
Bearing And Bushing Inserter
01-202-3935
Bearing And Bushing Inserter
01-202-3936
Bearing And Bushing Inserter
01-202-3937
Bearing And Bushing Inserter
01-202-3939
Bearing And Bushing Inserter
01-202-5434
Mechanical Puller
B-1b acft
01-202-7018
Spanner Wrench
Used on f-18 acft model.
01-202-7514
Mechanical Puller
For many pitman arm applications gear
01-202-9565
Spanner Wrench
Used on tf30 engine afterburner and exhaust nozzle control model aa-j3. spanner wrench
01-203-1425
Torque Wrench
01-203-1445
Terminal Hand Crimping Tool
01-203-1548
Electrical Contact Inserter
01-203-1976
Mechanical Puller
U/o shaft seals of reduction drive unit; KC135r acft
01-203-1978
Seal Inserter
01-203-3316
Socket Wrench Spanner Attachment
4.160" overall length 6irregular shaped: 3.620 o/a width by 4.160 o/a length; includes 2, 45 deg places; 0.250 radius, 6 places; includes 1.940 radius located 0.312 from second end; 0.170 dia thru to square hole, located 1.000 from length oxide surface treated hook
01-203-3427
Bearing And Bushing Inserter
1.500" overall length black oxide finish per mil-c-13924 cl 1; quench
01-203-3482
Mechanical Puller
01-203-4332
Bearing And Bushing Inserter
6.000" overall length
01-203-4882
Socket Wrench Handle Bar
180.0mm overall length 8.0mm outside diameter straight solid
01-203-4917
Hydraulic Hand Jack
01-203-7483
Torque Wrench Adapter
Item consists of socket per spec ggg-w-641e type 11, class 2, style a, 9/16 x 3/8; arm p/n 12315882; finish phosphate coat, type m or z, class 2 per mil-P16232
01-203-7839
Bearing And Bushing Inserter
Used on m1,xm1 tank. 4.500" overall length
