01-189-9637
Abrasive Wheel Hand Dresser
01-190-0782
Bearing And Bushing Inserter
01-190-2827
Socket Wr Screwdriver Attachment
2.375" overall length 0.969" outside diameter chromium surface treated 187c hexagon
01-190-2994
Mechanical Puller
Removes compressor rotor from shaft; b-1b acft
01-190-5550
Torque Wrench Adapter
Used on sturtevant-richmont type ccm and ltc torque wrenches. open end
01-190-6827
Torque Wrench Adapter
Used on f109-ga-100 engine. 1.750" overall length
01-190-6828
Torque Wrench Adapter
Used on f109-ga-100 engine. 2.375" overall length
01-190-7051
Seal Inserter
01-190-8131
Wrench Face Spanner Socket
2.250" overall length 3.125" outside diameter
01-190-8356
Bearing And Bushing Inserter
2.000" overall length item consists of 2 identical pieces
01-190-8658
Socket Wrench
7.000" overall length
01-190-8664
Socket Wrench
Used on 4320-01-533-6418. 17.000" overall length 3 1/4 in. wide; used for counter support for tensional vibration dampener; a special tool to hold the front pulley on an engine while torque is applied to central bolt 171 single socket offset
01-190-8675
Terminal Crim Contact Positioner
01-190-8677
Mechanical Puller
Air start distributor rotor puller; item includes: 1 puller, plate; 1 jackscrew 5/8-11 x 1-1/2; 2 capscrew, pullers 10-1.5 x 55; 2 pin, cotters 3/32 x 3/4
01-190-8990
Spanner Wrench
01-190-8992
Pliers
7.875" overall length spanner wrench type circular jaws with pins; 2 in. dia jaws; 0.093 in. dia pins (2)
01-190-9365
Melting Electric Pot
18.250" outside diameter
01-190-9397
Drill Guide
Steel; 1-1/2 in. w x 7 in. lg; 1/4
01-190-9599
Mechanical Puller Adapter
In accordance with department of the navy, naval ship systems command drawing 845-4687720, revision a, dated july 31, 1975. item 18 (adapter ball puller)
01-190-9732
Socket Wrench
Used on f111f pavetack.
01-190-9733
Wrench Face Spanner Socket
Used on f111f pavetack. 2.000" overall length 5.625" outside diameter lug
01-190-9734
Torque Wrench
Used on f111f pavetack.
01-190-9735
Torque Wrench Multiplier
Used on f108 engine.
01-190-9736
Torque Wrench Adapter
Used on f111f pavetack.
01-190-9737
Torque Wrench Adapter
Used on f111f pavetack.
01-191-0142
Mechanical Puller
B-1b acft
01-191-1540
Bearing And Inserter And Remover
14.000" overall length
01-191-1674
Mechanical Puller
To remove no. 3 turbine rotor; F107 engine
01-191-1675
Bearing And Bushing Inserter
3.000" overall length
01-191-1677
Seal Inserter
3.000" overall length
01-191-4497
Torque Wrench
7.500" overall length round ratchet head chromium surface treated rigid frame end drive
01-191-4500
Piston Ring Expander
Used on nsn 4310-01-158-3262, air compressor. 9 in. lg
01-191-4503
Valve Spring Compressor
L shape; lever actuated
01-191-5179
Socket Wrench Socket
0.844" overall length internal-internal
01-191-5413
Socket Wrench Socket
Used on 1730011429291.
01-191-5414
Socket Wrench
Used on aircraft model f-18.
01-191-5898
Terminal Crim Contact Positioner
01-191-7043
Terminal Hand Crimping Tool
For molex/waldom terminals HT1921, .062 in. dia, type 11-01-0015
01-191-7044
Terminal Hand Crimping Tool
For molex/waldom terminals HT1919, .093 in. dia, type 11-01-0014
01-191-7245
Retaining Ring Pliers Set
01-191-9094
Box Wrench
10.875" overall length chromium surface treated
01-191-9290
Socket Head Screw Key
244.5mm overall length looped handle oxide surface treated fixed t-handle
01-191-9309
Oil Filter Wrench
01-191-9381
Pin Inserter
0.38 in. dia; 6.00 in. lg
01-191-9382
Pin Inserter
6.00 in. lg, 0.38 in. dia
01-191-9399
Wire Twister Pliers
12.000" overall length with side cutter
01-191-9543
Piston Ring Compressor
01-191-9544
Piston Ring Compressor
01-191-9545
Mechanical Puller
Steel; 16.0 in. x 4.0 in.
