01-175-1426
Drive Pin Punch
Point cross-sectional shape is flat; shape is round w/flat; removes sleeves
01-175-3584
Socket Wrenc Crowfoot Attachment
01-175-3585
Socket Wrenc Crowfoot Attachment
01-175-3604
Socket Wrench Spanner Attachment
01-175-3605
Torque Wrench Adapter
01-175-3895
Socket Head Screw Key
Used on f108 engine.
01-175-3896
Socket Wrench
Used on f108 engine. 7.000" overall length single socket offset
01-175-7134
Spanner Wrench
4.650" overall length double ended; 0.937 in. radius at eye end, 0.758 in. radius at objective end; 0.190 in. thick pin
01-175-8876
Wrench Face Spanner Socket
1.370" overall length 1.700" outside diameter passivate surface treated slot
01-175-9176
Terminal Crim Contact Positioner
01-175-9362
Socket Head Screw Key
5.000" overall length screwdriver handle
01-175-9363
Socket Head Screw Key
Mounting plate included screwdriver handle
01-176-1349
Socket Wrench
01-176-1803
Socket Wrench
Used on engineered air systems inc. no. 26000-100 decontamination apparatus. 5.938" overall length supplied with 5/16 in. dia x 4 3/4 in. lg handle chromium or zinc or oxide surface treated
01-176-1805
Open End Wrench
Used on decontamination apparatus p/n 26000-100
01-176-1819
Combination Box And O Wrench Set
Standard lengths
01-176-1820
Combination Box And O Wrench Set
Standard lengths
01-176-1822
Combination Box And O Wrench Set
Short lengths
01-176-1835
Bearing And Bushing Inserter
Used on detroit diesel allison at540, at543 and at545.
01-176-1845
Seal Inserter
Used on allison series at-500 transmissions.
01-176-2304
Pliers
Pliers consist of two arms; firstarm has two pins, second arm has a punch
01-176-3540
Tube Hand Bender
01-176-3884
Socket Wrench Handle
11.500" overall length chromium surface treated hinged
01-176-3887
Jeweler's Swivel Screwdriver Set
01-176-3889
Mechanical Puller
Used on allison series mt-640, mt-643, mt-644 and at-500 transmissions.
01-176-3893
Pin Remover
Used on allison series mt-600 transmissions.
01-176-3896
Socket Wrench Handle
39.000" overall length 2.563" overall width detachable ratchet head; 32 gear teeth chromium surface treated ratchet
01-176-4969
Electrical Contact Remover
01-176-5221
Electronic Equipm Alignment Tool
To align relay assy to rotor support battery during assy/operation; e/i 6605-01-111-1830
01-176-6333
Torque Wrench Adapter
2.250" overall length 1.000" outside diameter socket to socket
01-176-6391
Pliers
Consists of two special long armswith a pivot point towards one end, length 26.000"
01-176-6931
Plier Wrench
10.000" overall length locking pliers
01-176-8219
Crimping Tool Die
01-176-8224
Terminal Hand Crimping Tool
01-176-8352
Bucking Rivet Bar
01-176-8353
Bucking Rivet Bar
01-176-9047
Socket Head Screw Key
Used on f108 engine. 2.375" overall length l-handle
01-177-0816
Six Point Tip Screwdriver
5.875" overall length
01-177-1618
Storage Battery Hand Carrier
01-177-2685
Lamp Extractor
For removing T3-1/4
01-177-3361
Terminal Hand Crimping Tool
01-177-3593
Mechanical Puller
Impulse coupling, two jaw
01-177-4059
Bearing And Bushing Inserter
3.500" overall length phosphate coat mil-c-16232, type m, class 2; heat treat to rockwell c 24-28, mil-h-6875, prior to finish maching
01-177-4060
Bearing And Bushing Inserter
3.000" overall length phosphate coat per mil-c-16232 type m class 2; heat treat to rockwell C24-28 per mil-h-6875 prior to finish maching
01-177-4061
Bearing And Bushing Inserter
3.000" overall length phosphate coat per mil-c-16232 type m class 2; heat treat to rockwell C24-28 per mil-h-6875 prior to finish maching
01-177-4062
Bearing And Bushing Inserter
3.000" overall length phosphate coat per mil-c-16232 type m class 2; heat treat to rockwell C24-28 per mil-h-6875 prior to finish maching
01-177-4102
Socket Wrench Socket
1.250" overall length chromium surface treated internal-internal
01-177-4103
Socket Wrench Socket
1.250" overall length chromium surface treated internal-internal
