01-158-6626
Screwdriver Bit
1.500" overall length manual tool
01-158-6627
Mechanical Puller
6.600 in dia split ring with two screws when drawn up form a clamp to pull a sleeve, four 0.420 in holes equally spaced on 5.500 in dia in face of puller
01-158-7775
Spanner Wrench
Used on randr of reduction drive assy for t-62t-2b engine. 2.500" overall length 1.188" outside diameter tubular lug
01-158-7776
Spanner Wrench
Used on mk42 gun mount (5 in.). 18.000" overall length 2.000" outside diameter double ended; four 0.305 in. width lugs at one end, four 0.370 in. width lugs at other; 90 deg angle between lugs at both ends; 6 in. lg handle attached to middle of wrench body tubular lug
01-158-7777
Socket Head Screw Key
8.250" overall length handle bonded to short arm l-handle
01-158-7787
Terminal Hand Crimping Tool
Interchangeable die frame, ACCOMM0dates rsk connector series
01-159-0076
Electrical Contact Remover
01-159-0502
Screwdriver Bit
6.000" overall length manual tool; replacement bit for snap-on no. TMA2 driver
01-159-1736
Mechanical Puller
Used on allison series ht-700 and c(lb)t 750 transmissions.
01-159-1842
Bearing And Bushing Inserter
Used on allison series ht-700, c(lb)t 750 and v-700 transmissions.
01-159-2271
Socket Wrench
8.250" overall length oxide surface treated
01-159-3044
Cross Tip Screwdriver
01-159-3860
Spanner Wrench
40.000" overall length head offset 15 degrees from line running parallel along top surface of wrench hook
01-159-4354
Open End Wrench
3.620" overall length
01-159-4920
Bearing And Inserter And Remover
Used on chrysler engines.
01-159-4921
Splicing Sleeve Compressing Tool
01-159-4922
Terminal Hand Crimping Tool
01-159-4923
Terminal Hand Crimping Tool
3.17 to 3.97 in. std terminal strip lg (26 to 24 awg) ; 4.37 to 5.16 in. std terminal strip lg (22 to 20 awg) ; 3.57 to 4.37 in. butt splice strip lg (26 to 24 awg) ; 5.16 to 5.95 in. butt splice strip lg (22 to 20 awg)
01-159-4924
Terminal Hand Crimping Tool
01-159-4925
Cable Woven Grip
10.000" overall length snap hook attached
01-159-4926
Retaining Ring Installation Tool
3.000" overall length
01-159-5280
Open End Wrench
3.500" overall length chromium surface treated
01-159-6034
Box And Open End Combinat Wrench
26.000" overall length chromium surface treated
01-159-6037
Combination Box And O Wrench Set
Standard lengths
01-159-6487
Screw Thread Insert Inserter
Item has 0.375 in square drive end; 34 teeth 0.440 in from drive end tip; 1.260 in length o/a; 0.522 in working end dia.
01-159-7790
Mechanical Puller
Used on a/f32u-8 decontamination system. gear
01-159-8872
Leveling-support Jack
01-159-9300
Spanner Wrench
Used on mil-c-22249 208-pin plug connectors. 17.250" overall length face pin
01-159-9302
Socket Wrench Socket
40.0mm overall length chromium surface treated internal-internal
01-159-9308
Mechanical Puller Attachment
6 in dia by 0.875 in thk with 1.813 in slot in side; two stepped surfaces out from slot; two 5/8-18 nf holes
01-160-1019
Socket Head Screw Key
4.750" overall length 11.000" overall width used to change range of operationon main air cond fixed t-handle
01-160-1305
Socket Head Screw Key
6.000" overall length oxide surface treated l-handle
01-160-1307
Open End Wrench
8.625" overall length
01-160-1309
Torque Wrench
24.750" overall length ratchet head chromium surface treated micrometer end drive
01-160-1310
Adjustable Wrench
Wrench for electrical jam nuts; dimensions: 11 x 1 1/4 x 2"; for installation
01-160-1311
Ratchet Wrench
13.160" overall length zinc surface treated
01-160-1312
Crimping Tool Die
Used on m22520/5-01 crimp tool.
01-160-1320
Electrical Contact Inserter
Used on cannon series d ra connectors.
01-160-1321
Terminal Hand Crimping Tool
01-160-1322
Mechanical Puller Attachment
5.250 in dia with 1.312 in wide slot in side, sides of slot stepped, TWO5/8-18nf-2 thru holes
01-160-2930
Screwdriver Bit
127.0mm overall length replacement bit for snap-on no. FAML8 driver
01-160-5027
Spanner Wrench
4.000" overall length 0.703" overall width in accordance with gsa drawing number 01-160-5027 dated march 06, 1991 paint surface treated tubular lug
01-160-5631
Pike Pole
Used on tactical firefighting equipment; nsn 4210-01-486-1035 tfft (tactical fire fighting truck).
01-160-7283
Mechanical Puller
01-160-8062
Pike Pole
Used on 4210-01-486-1035 tfft (tactical fire fighting truck).
01-160-8861
Torque Wrench
300.0mm overall length
01-160-8862
Socket Wr Screwdriver Attachment
60.0mm overall length 23.0mm outside diameter socket coating - chrome, bit coating - oxide, manual tool chromium drive surface surface treated 187c hexagon
01-160-8863
Oil Filter Wrench
