01-096-7547
Terminal Hand Crimping Tool
01-096-7829
Center Automatic Punch
01-096-8487
Terminal Crim Contact Positioner
01-096-9297
Mechanical Puller Attachment
Bearing external
01-096-9410
Electronic Equipm Alignment Tool
1.230" overall length
01-096-9681
Bearing And Bushing Inserter
01-096-9682
Bearing And Bushing Inserter
01-096-9684
Seal Inserter
01-097-0078
Screwdriver Bit
1.250" overall length
01-097-0400
Open End Wrench
3.000" overall length nickel surface treated
01-097-0519
Electronic Equipment Tuning Wand
01-097-0520
Electronic Equipment Tuning Wand
01-097-0521
Electronic Equipment Tuning Wand
01-097-0696
Mechanical Puller
Gear
01-097-0984
Wrench Face Spanner Socket
Lug
01-097-1136
Seal Remover
Used on engine model f402.
01-097-2334
Spanner Wrench
Used on a-10a ac generator p/n 977j036-1 and -2. face lug
01-097-2847
Tap And Reamer Wrench
Used on e-3a stabilizer trim actuator assembly p/n 65-6456.
01-097-4520
Hand Hammer
11.000" overall length dead blow; urethane coated head, handle soft-head
01-097-6043
Mechanical Puller
Used on f-16 acft age. flaperon gland puller internally threaded aluminum tube; threads mate w/threaded protrusion on gland; used for manually pushing or pulling the gland in the cylinder
01-097-6045
Preformed Packing Inserter
Used on f-16a/b acft rudder servoactuator assembly. rudder piston rod assembly bullet thin wall tube w/blended starting taper
01-097-6815
Inspection Mirror
9.250" overall length
01-097-6932
Mechanical Puller Set
Used on 2320-01-028-4396.
01-097-6954
Bearing And Bushing Inserter
Used on 2320-01-028-4395.
01-097-7363
Preformed Packing Inserter
Used on f-16a/b acft age. steel tube; gradual entrance taperprovides for a gradual compression of the seals; voter no. 1 system no. 2; drwg name freezing sleeve, valve assembly, seal
01-097-9015
Spanner Wrench
Used on f-16 support equipment diskette storage drive.
01-097-9625
Hydraulic Hand Jack
Load capacity 8 tons
01-098-0309
Mechanical Puller
Gear
01-098-1229
Mechanical Puller Attachment
Bearing external
01-098-2183
Mechanical Puller
01-098-3285
Torque Wrench Adapter
Used on f-15a/b/c/d acft hydraulic pressure reducer valve p/n 41000140-101. 3.500" overall length 0.812" outside diameter socket to socket
01-098-4180
Mechanical Puller
Bolt, threaded, double male-ended, 9 in.lg, with 3/4-10 all thread, 1018 steel, case-hardened; 3.4-10 hex nut, grade 5 steel, puller block 3/4 in.thk by 2 in.wide; puller head 4-1/4 in.lg by 1.420 dia, matl 41L42 heat treated RC35 to 40
01-098-4475
Socket Wrench Socket
01-098-5232
Wrench Face Spanner Socket
01-099-1700
Socket Wrench Socket
1.938" overall length chromium surface treated internal-internal
01-099-3434
Socket Wrench Socket
4.250" overall length for rounded hex nuts; used with torque wrench to tighten/loosen truck wheel bearing locknuts internal-internal
01-099-6341
Hand Hammer
Used on 2320-01-028-4395,truck,tank,6x4,m915.
01-099-6437
Bearing And Inserter And Remover
Used on 2350-01-061-2306 tank,combat m60a3. 10.125" overall length four thru holes every 90 deg
01-099-7468
Screw Hand Jack
Used on 611j165. c/o 1 ea. bolt, machine 375-24, stop,
01-100-0135
Bearing And Bushing Remover
Used on 2320-01-028-4395 truck,tank 6x4 m915.
01-100-0391
Spanner Wrench
Used on 2350-01-087-1095; pk2,sp2,xm1. tm 9-2350-264-24p-1,13 dec 90.
01-100-2494
Open End Box Wrench
6.906" overall length forged steel chromium surface treated
01-100-5177
Mechanical Puller
01-100-5242
Torque Wrench
Used on aircraft e-2c.
01-100-5883
Spanner Wrench
13.375" overall length any acceptable surface treated adjustable pin
01-100-6809
Contact Hand Burnisher
Used on nsn 6625-01-087-2534 test adapter. 2.938" overall length
01-100-9530
Craftsman's Tweezers
01-101-0577
Spanner Wrench
