Nonedged Nonpowered Hand Tools FSG 51 — FSC 5120

NSN
NIIN
Name
Details
00-883-6260
Cable Jaw Grip
00-883-6262
Spade
00-883-6263
Mechanical Puller
Gear
00-883-9533
Socket Wrenc Crowfoot Attachment
0.968" overall length 0.469" overall width sae-as 954 configuration nickel surface treated 56 flare nut
00-883-9593
Box Wrench
38.250" overall length
00-883-9598
Socket Wrenc Crowfoot Attachment
0.968" overall length 0.500" overall width nickel surface treated 56 flare nut
00-884-3000
Mechanical Puller
00-884-3016
Mechanical Puller
Consists of 11 components 1 ea; handle, crank, check nut, pin, shaft, cap, pin, bushing washer, nylon washer, and retaing ring bearing
00-884-3027
Mechanical Puller
Matl-steel; o/a lg of assembled tool 13.500 in.; shaft thd 0.500-13 UNC3.500 in. lg of thd w/speed handle on opposite end of shaft; functional features consist of 2 fingers; 2 pads, toggle clamp
00-884-3028
Mechanical Puller
Consists of handknob, screw, body, 2 fingers
00-884-3029
Mechanical Puller
Consists of hex bolt, puller plate
00-884-4812
Socket Head Screw Key
00-884-6291
Mechanical Puller
Consists of bolt, slide hammer, collet andring
00-884-6293
Spanner Wrench
13.000" overall length 6.594" outside diameter handle width of 1.875 in.min chromium surface treated
00-884-6741
Cable Woven Grip
30.500" overall length
00-884-8184
Open End Wrench
11.250" overall length
00-884-8194
Mechanical Puller
00-884-8618
Spanner Wrench
7.130" overall length 5.880" overall width in accordance with gsa drawing number 00-884-8618, dated february 3, 1989 oxide or phosphate surface treated tubular lug
00-885-1791
Torque Wrench Adapter
9.800" overall length offset handle open end
00-885-1792
Open End Wrench
Used on rh-53d helicopter. 9.800" overall length 1/2 in. female sq drive in handle nickel surface treated
00-885-7706
Terminal Hand Crimping Tool
Used on schedule a(sch a).
00-885-9381
Mechanical Puller
00-885-9960
Mechanical Puller
T-handle type
00-886-1528
Spanner Wrench
12.500" overall length
00-886-1794
Spanner Wrench
6.147" overall length hook
00-886-3602
Socket Head Screw Key
20.500" overall length 4.500" overall width fixed t-handle
00-886-4552
Socket Wrench Socket
3.250" overall length 0.250 in. wide slot by 2.000 in. long in wrench surface side chromium surface treated internal-internal
00-886-7188
Drift
Used on tf33 engine.
00-886-9167
Mechanical Puller Adapter
00-887-0957
Socket Wrench
2.625" overall length nonremovable sliding handle chromium surface treated
00-887-1830
Spanner Wrench
5.000" overall length 0.734" overall width face lug
00-887-1834
Box Wrench
5.875" overall length 2.250" outside diameter straight single head
00-887-3544
Socket Wrench
15.000" overall length designed to fit into flanged grease retainer
00-887-5086
Nutdriver
4.500" overall length knurled handle; for use with continental connector screws
00-887-5092
Nutdriver
4.500" overall length knurled handle; for use with continental connector screws
00-888-0767
Socket Head Screw Key Blade
Use on teletype equipment
00-888-0794
Open End Fixed Wrench Set
00-888-0829
Socket Head Screw Key
1.437" overall length l-handle
00-888-3360
Socket Head Screw Key
6.500" overall length l-handle both ends l-handle
00-888-3361
Socket Head Screw Key
9.000" overall length l-handle both ends; 2nd handle lg. of 2.125" l-handle
00-888-3362
Pin Remover
14.250" overall length t-handle; threaded tip
00-888-3364
Socket Head Screw Key
11.344" overall length 3.500" overall width phosphate surface treated fixed t-handle
00-888-3365
Pin Remover
9.250" overall length t-handle; 1/4 in. dia shank with 4-40 nc-2b x 1/2 in. deep threads
00-888-3366
Socket Head Screw Key
16.250" overall length 4.500" overall width phosphate surface treated fixed t-handle
00-888-3367
Socket Head Screw Key
Offset handle phosphate surface treated
00-888-3368
Socket Head Screw Key
4.500" overall length l-handle both ends; 2nd handle lg. of 0.750" l-handle
00-888-3449
Electrical Contact Inserter
Used on itt cannon ca-rx series front release connectors.
00-888-3948
Spanner Wrench
12.800" overall length cadmium surface treated
00-888-5118
Box Wrench
12.000" overall length cadmium surface treated
00-888-5826
Screwdriver Bit
1.000" overall length manual tool
Page: 255 ...