00-780-4342
Hand Hammer
Used on 105mm howitzer,m102,with m6 platform.
00-780-4423
Mechanical Puller
00-780-4424
Mechanical Puller
00-780-6368
Preformed Packing Inserter
00-780-6370
Pliers
Pliers, extracting
00-780-6447
Spanner Wrench
00-780-8379
Wrench Face Spanner Socket
1.615" overall length 3.615" outside diameter oxide surface treated lug
00-781-0819
Slip Joint Pliers
12.000" overall length straight serrated jaws
00-781-0820
Slip Joint Pliers
16.000" overall length straight serrated jaws
00-781-1869
Piston Ring Compressor
00-781-6195
Socket Wrench
22.438" overall length fixed handle chromium surface treated
00-781-7311
Mechanical Puller
00-781-7326
Mechanical Puller
00-781-7891
Cable Tie Installation Tool
Pistol grip; for installing MS3367-1, MS3367-2, MS3367-5, MS3368-1, MS3368-2, MS3368-3, MS3368-4
00-781-8321
Terminal Hand Crimping Tool
Furnished w/0.068, 0.252
00-781-8322
Terminal Hand Crimping Tool
Furnished with double hex die size 0.178X0.400 in.
00-781-8549
Bearing And Bushing Inserter
3.000" overall length finger tip removal groove in boss
00-781-8746
Screw Thread Insert Inserter
00-781-8977
Socket Head Screw Key
1.731" overall length l-handle
00-781-9839
Aligning Punch
8.000" overall length shank shape may also be round, square or octagonal
00-782-1149
Socket Wrenc Crowfoot Attachment
00-782-1321
Electrical Contact Inserter
00-782-1663
Tube Hand Flaring Tool
Concentric flaring cone; swivel head clamp to lock tube in die block; lathe type tube feed; for flaring 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1, 1-1/4
00-782-1666
Mechanical Jack Handle
Used on 369A. painted yellow color no. 33538 per fed std 595; 4 in. knurl at one end; handle must be capable of sustaining 80 lbs when applied 1 in. from knurled end; o/a nom. lg is 38 in.
00-782-1679
Terminal Hand Crimping Tool
00-782-1680
Terminal Hand Crimping Tool
00-782-1681
Terminal Hand Crimping Tool
00-782-1987
Mechanical Puller Forcing Screw
00-782-4234
Electrical Contact Remover
00-782-4235
Electrical Contact Inserter
00-782-4236
Electrical Contact Inserter
Used on cannon series kptm connectors.
00-782-4392
Socket Wrench Socket
3.750" overall length internal-internal
00-782-4432
Socket Wrenc Crowfoot Attachment
00-782-4438
Bearing And Bushing Inserter
3.000" overall length
00-782-4564
Flat Tip Screwdriver
3/8 in. female sq drive in top of handle
00-782-4592
Torque Wrench
66.000" overall length any acceptable surface treated rigid frame center drive w/detachable arms
00-782-5773
Torque Wrench
00-782-5774
Spanner Wrench
00-782-6063
Wrench Face Spanner Socket
00-782-7050
Bearing And Bushing Inserter
10.000" overall length seating tool, bearing plug
00-782-7051
Seal Inserter
4.000" overall length
00-783-2831
Mechanical Puller
No. 2 bearing puller on rotating rear air SEALJ79-8
00-783-6327
Mechanical Puller
Consists of bar, pressure screw
00-783-8382
Mechanical Puller
00-784-1276
Mechanical Puller
00-784-1298
Rotating Members Aligning Tool
00-784-2036
Timber Bar
Used on tf33/j57 engine. 31.000" overall length bar-combustion loavre straightening cut
00-784-2050
Terminal Hand Crimping Tool
4.37 to 5.16 in. std terminal strip lg (22 to 14 awg) ; 6.35 to 7.14 in. std terminal strip lg (12 to 10 awg) ; 6.35 to 7.14 in. butt splice strip lg (22 to 10 awg) ; 7.94 to 8.73 in. parallel splice strip lg (22 to 10 awg)
00-784-2878
Spanner Wrench
Used on 50 caliber machine gun. lug
00-784-2883
Mechanical Puller
Horizontal expander
