00-073-9736
Track Connecting Full Tr Fixture
00-074-2001
Drive Pin Punch
6.000" overall length
00-074-4051
Box And Open End Combinat Wrench
6.875" overall length
00-074-4352
Tube Hand Flaring Tool
For flaring 3/4, 7/8, 1, 1-1/4, 1-1/2
00-074-4835
Mechanical Puller
00-074-9510
Torque Wrench Adapter
Used on computer,ballistics (m13); nsn 1220-00-344-4678. aluminum is T3 24; screw is 0.190-24unc, 2.625 in. lg., med. diamond knurl head
00-074-9953
Mechanical Puller
00-075-0210
Terminal Hand Crimping Tool
Consists of 1 ea nsn 5120-00-117-4830 crimping tool frame
00-075-0378
Mechanical Puller
Steel, corrosion resistant; relince varnish co.b-11891 aluminum enamel finish; 0.375 in. od; oval shape handle; one end thd 3/8-16unc; thd lg 0.375 in.
00-075-1036
Spanner Wrench
17.000" overall length 4.000" overall width identification tag attached to handle with nylon cable; hole dia 0.690 in. face hole
00-075-1039
Torque Wrench Adapter
5.000" overall length 0.400 in. wide open end
00-075-1048
Mechanical Puller
Used to remove bearing
00-075-2547
Terminal Crim Contact Positioner
00-075-2568
Spanner Wrench
00-075-2797
Mechanical Puller
Material steel bearing
00-075-3233
Friction Igniter Flint Tip
00-075-3335
Sealant Dispenser
Ratchet plunger type; for cartridge use; barrel size 2 in/dia, 14 in/lg, discharge nozzle shape round, 1/4 in
00-075-4882
Piston Ring Compressor
00-075-5899
Wrench Face Spanner Socket
Used on h-53 helicopter nose landing gear drag strut assembly.
00-075-6010
Spanner Wrench
Cadmium surface treated
00-075-9441
Torque Wrench
00-076-0925
Mechanical Puller
00-076-0998
Terminal Hand Crimping Tool
For use to crimp 3m co type ur, ug
00-076-1441
Open End Wrench
8.000" overall length
00-076-1787
Socket Head Screw Key
Used on schedule a(sch a). 11.375" overall length l-handle
00-076-2355
Spanner Wrench
15.250" overall length 9.500" outside diameter nonadjustable lug type
00-076-2703
Drive Pin Punch
Shape: straight
00-076-3173
Pliers
Used on t-56 turboprop engine. 4.500" overall length to name: air inlet vane trailing edge forming pliers
00-076-3174
Bearing And Inserter And Remover
Puller-bearing, gear box pinion frt. (hydraulic) pulls the inner race of the frt roller brg from the pinion gr shaft
00-076-3270
Socket Wrench Socket
3.000" overall length chromium surface treated internal-internal
00-076-3286
Seal Inserter
00-076-3857
Open End Wrench
00-076-3860
Piston Ring Compressor
00-076-3861
Piston Ring Compressor
00-076-4380
Spanner Wrench
2.438" overall length 0.562" outside diameter slot depth 7/64 in.
00-076-8630
Wire Furnace And Flue Brush
Double spiral round
00-076-9523
Socket Wrench Socket
Used on tf33 engines.
00-076-9548
Bearing And Bushing Inserter
7.125" overall length
00-076-9549
Bearing And Bushing Inserter
6.720" overall length
00-077-1822
Pliers
Used on nsn 1730-00-157-4903 aircraft component hoisting unit. 6.125" overall length end cutter (transverse) ; 1-3/8 in. jaw lg; with coil spring
00-077-1851
Spanner Wrench
10.000" overall length 3.000" outside diameter
00-077-1987
Box And Open End Combinat Wrench
164.0mm overall length chromium surface treated
00-077-2081
Spanner Wrench
3.750" overall length 0.380" overall width in accordance with u.s. army armament research face lug
00-077-2241
Box Wrench
5.625" overall length 2.260" outside diameter cupped striking anvils at end of handle
00-077-3379
Socket Wrench Adapter
Used on j47/j73/j79/j93/t58/t64/cfm56 engines.
00-078-0530
Spanner Wrench
Used on main landing gear drag strut 65251-08060-042.
00-078-0531
Socket Wrenc Crowfoot Attachment
Used on h-53 helicopter nose landing gear drag strut assembly.
00-078-0533
Spanner Wrench
Cadmium surface treated
00-078-0534
Wrench Face Spanner Socket
3.000" overall length 5.500" outside diameter
00-078-0536
Spanner Wrench
