00-299-4201
Seal Inserter
3.500" overall length
00-299-4202
Preformed Packing Remover
2.500" overall length item is 0.562 in. wide
00-299-4377
Wrench Face Spanner Socket
3.120" overall length
00-299-6191
Torque Wrench
Pivoted handle chromium surface treated deflecting frame end drive
00-299-6790
Caulking Gun Nozzle
4.125" overall length 3/64 in. x 9/64 in. orifice
00-299-8424
Hand Hammer
Chasing
00-299-8431
Hammer Handle
14.000" overall length blacksmith
00-300-2568
Mechanical Puller
Matl stainless steel, passivated finish 1.5 in. by 5.5 in. o/a
00-300-4151
Bearing And Bushing Remover
00-301-0037
Mechanical Puller
00-301-0816
Wrench Face Spanner Socket
1.625" overall length 5.750" outside diameter lug
00-301-0910
Wrench Face Spanner Socket
2.250" overall length 1.188" outside diameter lug
00-301-1076
Flat Tip-cross Tip Screwdriver
4.000" overall length
00-301-1077
Driftpin
7.000" overall length as modified by largest diameter
00-301-1078
Lead Seal Hand Press
00-301-1216
Screw Hand Jack
00-301-1291
Spanner Wrench
00-301-1326
Mechanical Puller Attachment
00-301-5445
Mechanical Puller
Consists of tube, wedge, disc, sq head bolt, 2 plate washers, hex nut
00-301-5977
Mechanical Puller
Gear
00-302-1686
Screwdriver Bit
00-302-1688
Torque Wrench
Flare nut wrench head size 7/16 in. (12 point)
00-302-1690
Torque Wrench
Flarenut wrench head size 9/16 in. (12 point) chrome plate surface treated
00-302-3721
Mechanical Puller
Matl steel, stainless, passivated finish, 3.5 in. by 11.0 in. o/a
00-302-3784
Piston Inserter
3.000" overall length 2.500 in. wide; 0.500 in. h
00-302-3791
Bearing And Bushing Inserter
4.375" overall length
00-302-3792
Seal Inserter
5.500" overall length
00-302-5445
Plier Wrench
16.500" overall length 2.625" overall width oxide surface treated
00-302-5696
Open End Wrench
2.750" overall length chromium surface treated
00-302-5698
Drive Pin Punch Set
00-302-5845
Mechanical Puller Adapter
Male to female
00-302-5848
Mechanical Puller Adapter
Male to female
00-302-5850
Mechanical Puller Adapter
Male to female
00-302-5856
Mechanical Puller Adapter
Male to female
00-302-5857
Mechanical Puller Forcing Screw
13.750" overall length
00-302-6456
Spanner Wrench
3.000" overall length 3 in. handle lg; 0.374 in. dia x 1 in. lg pilot tubular lug
00-302-8408
Socket Wrench
00-303-0901
Socket Wrench Spanner Attachment
00-303-0902
Hand Rivet Set
Used on J57. anvile, turbine rear name in t.o. anvile-turbine rear shaft gas seal rivet 2.000 dia x 5.000 tool steel
00-303-0903
Socket Wrenc Crowfoot Attachment
00-303-0904
Socket Wrenc Crowfoot Attachment
00-303-0905
Torque Wrench Adapter
Oxide surface treated offset
00-303-0906
Wrench Face Spanner Socket
Used on j57/tf33 engines. wrench bearing inner
00-303-0915
Wrench Face Spanner Socket
00-303-0916
Wrench Face Spanner Socket
Used on j57/tf33 engines. wrench, tube front seal nut
00-303-0942
Wrench Face Spanner Socket
