01-643-7160
Pole Extension
Used on extenion pole. 24.0" overall length bilogical tripod extenion is used to extend the bilogical series of antennas off of the tripod approximately 20", 1 inch tubular fiberglass rod has a 1/4-20 female thread to connect to the top of the azimuth, other end has a 1/4-20 male screw to attach to the antenna,
01-643-7629
Socket Head Screw Key
5 pieces - 4, 5, 6, 8, 10 mm tee handle
01-643-7630
Socket Head Screw Key
Includes 6 pieces - 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 inch tee handle
01-643-7723
Telescoping Pole
Used on lightweight intergrated field transport (lift) system. 90.25" overall length combat carbo pole collapse into 5 sections 21.25" long; 3.2 lbs per pair; works with s-lift, r-lift, lift ladder
01-643-7957
Spanner Wrench
Septum nut wrench 9.27X2.54X1.91 cm
01-643-7964
Spanner Wrench
01-643-8192
Socket Head Screw Key
6.160" overall length oxide surface treated l-handle
01-643-8215
Socket Wrench Socket
01-643-8338
Torque Wrench Adapter
01-643-8452
Mechanical Puller
Used on var. pitch aircraft propeller model no. 63e60-19/21/27. barrel half puller
01-643-8728
Socket Wrench Spanner Attachment
01-643-9654
Terminal Crim Contact Positioner
Turret head weight: 0.25 lbs
01-643-9656
Terminal Crim Contact Positioner
Positioner
01-644-0048
Flat Tip Screwdriver
11.313" overall length anti-slip tip
01-644-0317
Mechanical Puller
Used on f100-pw-229. puller, removal-civv sync ring
01-644-0344
Screw Extractor
Point diameter 11/16; shank diameter 1/4; length 2 -3/4; no 2
01-644-0345
Screw Extractor
Point diameter 1/8; shank diameter 3/16; length 2 -1/2; no 1
01-644-0348
Screw Extractor
Point diameter 9/32; shank diameter 3/8; length 3-1/4; no. 4
01-644-0349
Screw Extractor
Point diameter 7/32; shank diamet er 5/16; length 3 inch; no. 3
01-644-0352
Screw Extractor
Used on SATS. point diameter 21/64; shank diameter 7/16; length 3-1/2; no. 5
01-644-0359
C Clamp
Used on SATS.
01-644-0367
Starter Punch
5.625" overall length
01-644-0454
Sealant Dispenser
Manual, syringe type
01-644-0632
Screwdriver Bit
Hex metric socket
01-644-0794
Bumper Jack
Bus-transceiver temp range -40 to 85 degree c
01-644-1476
Open End Fixed Wrench Set
Thin head; 4 to 6-5/8 in. o/a lengths
01-644-1515
Retaining Ring Pliers
Snap ring pliers
01-644-1793
Socket Wrench Handle
20.000" overall length chromium surface treated sliding t
01-644-1794
Socket Wrench Extension
18.00" overall length chromium surface treated rigid
01-644-1795
Socket Wrench Socket
3.875" overall length chromium surface treated internal-internal
01-644-1923
Fin Straightener
Used on dl8411181. fin tool assembly
01-644-1938
Stud Remover Set
Set, stud remover 4 pieces 3/8-24 thru 1/2-20
01-644-2097
Hand Hammer
Used on SATS. 31.750" overall length sledge, stone
01-644-2098
Hand Hammer
Used on SATS. composite head material screw-in, inserted face
01-644-2100
Hand Hammer
16.50" overall length deadblow ball pein; urethane coated handle
01-644-2771
Hand Hammer
15.250" overall length dead blow; urethane coated head, handle
01-644-2772
Hand Hammer
10.125" overall length dead blow; urethane coated head, handle
01-644-2908
Screwdriver Bit
6.5" overall length
01-644-2910
Six Point Tip Screwdriver
211.0mm overall length screwdriver
01-644-3085
Socket Wrench Handle
28.500" overall length chromium surface treated sliding t
01-644-3086
Torque Wrench Multiplier
Used on SATS. 24.000" overall length geared
01-644-3437
Socket Head Screw Key
4.8125" overall length l-handle
01-644-3438
Socket Head Screw Key
Used on SATS. l-handle
01-644-3439
Socket Head Screw Key
Used on SATS. l-handle
01-644-3442
Socket Head Screw Key
Used on SATS. l-handle
01-644-3443
Socket Head Screw Key
Used on SATS. l-handle
01-644-3444
Socket Head Screw Key
Used on SATS. l-handle
01-644-3446
Socket Head Screw Key
Used on SATS. l-handle
01-644-3447
Socket Head Screw Key
Used on SATS. l-handle
