NSN 4140-00-009-8803 NIIN 000098803 — Tubeaxial Fan

NSN
Item Name
Assigned
DEMIL
Shelf Life
UOM
Using Services
NSN:
4140-00-009-8803
4140000098803
Description:
FAN,TUBEAXIAL
NSN Assigned:
11-AUG-72
DEMIL:
NO
Shelf Life:
N/A
UOM:
1 EA
Using Services:
Marines, Navy, Army, Air Force

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

4140-00-009-8803 Specification Set by the OEM (see RNCC code 3)

Speed Adjustments ABBB:

single speed

Length ABRY:

2.343in.

Flow Direction ADNK:

inward

Environmental Protection ADZC:

moisture resistant

Ambient Temp At Full Rated Power AEHY:

125.0 deg celsius

Operating Speed At Rated Capacity In Rpm AEQC:

11000.0

Electrical Connection Type AGBD:

connector receptacle

Static Pressure At Specified Air Flow Rate AJLY:

0.0in. of water

Drive Type AKCV:

direct

Prime Mover Type AKDJ:

electric motor

Inclosure Type AKNA:

fully inclosed

Mounting Facility Type And Quantity AXHR:

1 flange

Rotation Direction For Which Designed AYSY:

clockwise

Air Flow Rate CQKX:

190.0 cubic feet per minute

Voltage In Volts And Current Type CSBH:

115.0 ac

Prime Mover Power Rating CSYL:

0.085 horsepower

Housing Inside Diameter CWLX:

3.500in.

Prime Mover Drive Shaft Bearing Type CWLY:

ball

Phase FAAZ:

single

Frequency In Hertz FREQ:

400.0

Material MATT:

aluminum

Surface Treatment SFTT:

enamel

Style Designator STYL:

fixed

Test Data Document TEST:

10001-2836651 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number
Cage
RNCC
RNVC
DAC
RNAAC
Status
MSDS
SADC
Part Number:
A092496
Cage Code:
D9182
RNCC:
C
RNVC:
1
DAC:
6
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
AC
Part Number:
A074621
Cage Code:
D9182
RNCC:
C
RNVC:
1
DAC:
6
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
AC
Part Number:
8509720-1
Cage Code:
D9182
RNCC:
C
RNVC:
1
DAC:
6
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
AC
Part Number:
2836651
Cage Code:
53711
RNCC:
3
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
PROPIMAX3BM-754DH
Cage Code:
82877
RNCC:
5
RNVC:
2
DAC:
4
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
023303
Cage Code:
82877
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
PR0PIMAX3BM754DS
Cage Code:
82877
RNCC:
5
RNVC:
9
DAC:
3
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
128C891H01
Cage Code:
97942
RNCC:
5
RNVC:
2
DAC:
A
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
2836651
Cage Code:
10001
RNCC:
7
RNVC:
9
DAC:
A
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
A0-74621
Cage Code:
82877
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
A0-92496
Cage Code:
82877
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
CX
Status:
A
MSDS:
SADC:

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
04244
FIIG:
A087A0
Concept No.:
App. Key:
D
Cond. Code:
1
Status:
A
STYLE DESIGNATOR FIXED style nsn 4140-00-009-8803
STYLE DESIGNATOR FIXED style nsn 4140-00-009-8803
STYLE DESIGNATOR FIXED style nsn 4140-00-009-8803
STYLE DESIGNATOR FIXED style nsn 4140-00-009-8803
STYLE DESIGNATOR FIXED style nsn 4140-00-009-8803
STYLE DESIGNATOR FIXED style nsn 4140-00-009-8803
STYLE DESIGNATOR FIXED style nsn 4140-00-009-8803
STYLE DESIGNATOR FIXED style nsn 4140-00-009-8803
STYLE DESIGNATOR FIXED style nsn 4140-00-009-8803
STYLE DESIGNATOR FIXED style nsn 4140-00-009-8803
STYLE DESIGNATOR FIXED style nsn 4140-00-009-8803
STYLE DESIGNATOR FIXED style nsn 4140-00-009-8803
STYLE DESIGNATOR FIXED style nsn 4140-00-009-8803
STYLE DESIGNATOR FIXED style nsn 4140-00-009-8803

Definition Definition of approved item name (AIN): "FAN,TUBEAXIAL"

A nonpositive displacement mechanical device without guide vanes and having an axial fan impeller inclosed within a tubular housing. It is designed primarily for duct installation to move air or gas axially over a wide range of volumes at medium pressures.

Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims

Pack Size
Pack Weight
Item Weight
Item Dim.
Pack Size:
--
Paclk Weight:
1.5000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

  Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

4140-00-009-8803 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
N
PMIC:
U
ESD:
ESD:
ADPE:
CRITL:
X
Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) U

Precious metal content is unknown

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

  Identification Codes

HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.

PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Material Management Material categorization and source of supply

SOS
SMIC
MMAC
MCC
SOS:
SMS
SOS:
MMAC:
MCC:
B2
SOS:
SMS
SOS:
MMAC:
MCC:
Source of Supply (SOS) SMS

Defense logistics agency, enterprise business systems

  Material Codes

SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.

SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.

MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.

MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category

IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.

Solicitation History DLA solicitations for NSN 4140-00-009-8803

Solicitation
Ends
Qty
AMSC
Buyer
PR
SMB
Solicitation:
SPE8EB15T3606
End Date:
08/10/2015
Qty:
8 Ea
AMSC:
G
Buyer Code:
PEPCA
PR:
0059682852
SMB:
100%