Serving our customers with quality and safety first.
2
cylindrical bushing mounted
not established
1.160 centimeters
0.250in.
1.310in.
0.250in.
0.432in.
0.125 in.
round, stepped
dual concentric
312.0
8.00 INCH-Ounces
8.00 INCH-Ounces
192.00 INCH-Ounces
at 9 oclock
0.531in.
0.430 in.
0.375in.
unef
32.0
radially positioned over less than half the circumference
standard bushing
10.0 percent, rated amperes c and better finish and 2.5 gallons per minute c and better industrial clears
312.0
+0.0/+7.0 -55 deg celsius 1st section and +0.0/+10.0 -55 deg celsius 2nd section and +0.0/+5.0 -25 deg celsius 2nd section and +0.0/+3.5 -25 deg celsius 1st section and +0.0/+2.0 0 deg celsius 1st section and +0.0/+2.5 0 deg celsius 2nd section and -2.5/+2.5 85 deg celsius 1st section and -3.5/+3.5 85 deg celsius 2nd section and +0.0/+5.5 120 deg celsius 1st section and +0.0/+7.5 120 deg celsius 2nd section and +0.0/+8.5 150 deg celsius 1st section and +0.0/+12.5 150 deg celsius 2nd section
150.0 all sections
3.0 7th secondary at 10'30 oclock
-20.0/+20.0 all sections
stops
70.0 all sections
a 1st section and f 2nd section
inner shaft flatted 0.280 in. length by 0.080 in. height
97942-576R030 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
6 tab, solder lug
1EA
Schedule B number: 8533400080
nmfc 062960
Variable resistors, including potentiometers
FSC 5905 ⁓ Resistors
Excluding resistance wire.
inner shaft flatted 0.280 in. length by 0.080 in. height
Nothing similar to this part number was found in our inventory
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.