Recently Updated NSNs

thread size: 0.750 inches 1st end 0.438 inches 2nd end 0.750 inches 3rd end; seat angle is 24.0 degrees all ends; outside diameter tube accommodated: 0.750 inches 1st end 0.438 inches 2nd end 0.750 inches 3rd end

nsn 5315000069640 is made of steel with a phosphate surface treatment. casehardened chamfered and grooved.

nsn 2510000069636 is made of steel with a cadmium plated finish. the shaft length is 40-1/2 inches with a diameter of 1 inch. one 0.559 inch diameter mounting hole in connecting arm link.

nsn 2540000069631 has a steel housing and operates on 24v dc. has four 5/16 inch diameter mounting holes. length is 9 inches.

nsn 4810000069627 is designed to be used on a wrecker truck. end item identification 2320-00-051-0489. includes 2 o-rings 2 retainers 2 seals and 1 drawing.

nsn 6160000069626 is made of aluminum alloy. the cover is not provided. there is only 1 compartment.

can only withstand a maximum of 15 pounds per square inch of working pressure; knurled grip and retained on a 7.33 inch lanyard

caster plate is rectangular. 11 inches in length and 8.937 inches in width. center to center distance between bolt holes along width is 7.062 inches. center to center distance between bolt holes along length is 9.937 inches.

part numbers for nsn 3010000069590 include: 3b1161b-1 and mss3b1161b1; cage codes: 98296 0zlv2 and 62727.

thread direction right-hand 1st end; thread quantity per inch 11-1/2 1st end; thread size 0.750 inches 1st end; thread series designator nh 1st end

furnished with rubber dust cap steel locknut cotter pin and lubrication fitting; ball stud included; rod connecting end thread length is 2.250 inches

dod ammunition code 1325-e820 dot identification number un0034 dot registration code ex1988030355

body length 0.670 inches body width 0.230 inches body height 0.360 inches body style w/o mtg facilities terminals on opposite surfaces

nonderated continuous voltage rating and type per section 200.0 dc single section nonderated operating temp -55.0 deg celsius minimum and 85.0 deg celsius maximum

body style w/o mtg facilities terminals on opposite surfaces body length 0.650 inches body width 0.250 inches

round; inside diameter is 0.625 inches; outside diameter 0.937 to 1.00 inches

made of smooth plastic polytetrafluoroethylene; tube is shrinkable to 0.375 inches by heat application

nsn 2520-00-006-9573 has an outside diameter of 2.406 inches and a length of 2.603 inches.

wrenching surface size 0.125 inches single end; torque capacity 20.0 inch-pounds

length 2.48 inches; height 3.50 inches; width 3.50 inches; moving coil permanent magnet; jewel pivot base; zero adjuster; rectangular flush mounting

moisture resistant vibration resistant thermal shock resistant solvent resistant and salt water resistant

made of aluminum alloy with a cadmium and chromate surface treatment; straight shape external coupling with strain relief; length 1.980 inches; diameter 1.938 inches

length 1.98 inches; diameter 1.812 inches; cable entrance diameter 0.615 inches; mounting facility thickness 0.062 inches to 0.25 inches

length 1.80 inches to 1.840 inches; width 0.53 inches to 0.55 inches; thickness 0.088 inches to 0.098 inches

hole diameter 0.135 inches to 0.145 inches; outside diameter 0.307 inches to 0.317 inches

head style pan no. 2; head diameter 0.205 inches to 0.238 inches; head height 0.070 inches to 0.080 inches

body style w/o mtg facilities axial terminals body diameter 1.250 inches body length 2.250 inches

turn quantity 6-3/4 single component single primary turn quantity 1-1/4 single component single secondary

schematic diagram designator no common or grounded electrode(s) case material plastic dielectric material plastic polyethylene terephthalate

tolerance of temp coefficient per section in ppm per deg celsius -30.0/+30.0 single section