Recently Updated NSNs

mechanical constant speed drive nsn 1680000082884.

electrical resistance 49.900 ohms resistance tolerance in percent -10.000 to 10.000

helical compression spring seat nsn 5340000082949.

special nut nsn 5310000082916.

seal compostie nsn 5330000082899.

insep assy nsn 1680000082962.

stem governor nsn 1680000082929.

governor sleeve nsn 1680000082926.

bearing retainer nsn 3110000082894.

cross-sectional shape style 116 irregular shape from old fiig a03200

hexagon self-locking nut nsn 5310000082877.

ferrule nsn 4730000082875.

terminal length 1.5 maximum nonderated operating temp -55 degrees celsius minimum and 85 degrees celsius maximum body length 0.171 capacitance value per section 220 picofarads single section

electrical resistance 510 kilohms terminal length 1.5 body length 0.25 resistance tolerance in percent -2 to 2

summing amplifier nsn 6615000082864.

temp coefficient of resistance in ppm per degrees celsius -200/+200 body length 0.25 electrical resistance 75 ohms ambient temp in degrees celsius at full rated power 70

electrical resistance 200 kilohms ambient temp in degrees celsius at full rated power 70 body length 0.25 ambient temp in degrees celsius at zero percent rated power 250

width 0.625 thickness 0.25 length 1.75

straight shape; moisture resistant and shock resistant and vibration resistant

mounting configuration 4 0.100 inch diameter mounting holes spaced on 3.950 inch by 0.900 inch mounting centers; mounting method hole; depth 1.250 inches; length 3.700 inches; width 1.150 inches

thread class 2a single mounting facility; thread length 0.365 inches minimum single mounting facility and 0.385 inches maximum single mounting facility; length 1.940 inches maximum; diameter 1.440 inches maximum

length is 1.055 inches; width is 0.757 inches; thickness is 0.352 inches

wire lead terminals; hermetically sealed; electrical resistance 493.000 ohms

overall width 2.875 inches overall height 0.391 inches

overall length 3.031 inches overall height 0.391 inches

thread class 2a single mounting facility thread length 0.344 inches minimum single mounting facility and 0.391 inches maximum single mounting facility

body length 0.375 inches body width 0.205 inches body height 0.375 inches

body length 0.345 inches body height 0.180 inches

length 3.031 height 0.391 capacitor 1 connector 1 microcircuit 4 printed wiring board 1 test block 1

length 3.031 height 0.391 capacitor 1 connector 1 microcircuit 4 printed wiring board 1 test block 1