Recently Updated NSNs

iron base with supporting members as integral parts to assure perfect maintenance of the alignment of all operating parts the treated plates which are protected from the effect of moisture the stamped

1/8 in. diameter p/n ds9b10 safety pin p/n ambeu934gru5 identpin 1/8 in. diameter p/n ds9b11 fscm 04253

3.25 in. length 1.687 in. width 0.062 in. thk 0.875 in. height; 3 in. length by 0.375 in. width slot along length 0.438 in. from lower edge 0.193 in. width 2 slots along width 2.25 in. center to center

model: 403-1-12544-340

itar controlled (code b) model: 99-059-01

demil: not controlled model: 5470-1

impedance rating in ohms: 50.0 power rating: 5.000 kilowatts peak and 50.000 watts average

itar controlled (code b)

copper single mating end single contact grouping

removable single mating end single contact grouping

demil: not controlled model: hdd1sf2e03

demil: not controlled model: 26

demil: not controlled model: 107

demil: not controlled

demil: not controlled

demil: not controlled

tensile strength: at least 160000 pounds per square inch

resistance tolerance in percent -1 to +1

resistance tolerance in percent -1 to 1

resistance tolerance in percent -1 to 1

model: ataw100kp0rm1pct1-8w

model: aqc430.237.01

terminal length: 1.5 inches

terminal length: 1.5 inches

demil: not controlled

demil: not controlled

model: 01365000

demil: not controlled

terminal length: 1.375 inches

shaft length: 0.938 inches