National Stock number : 5990-00-421-0954
Electrical Resolver
| Available Quantity | 1 |
| Available Conditions | NS |
| Classification | Synchros and Resolvers - FSC 5990 |
| Schedule B | 9018903000 |
| Stock Check Date | 06/28/2025 |
Part-Number.info Quality System
- ISO 9001:2015 + AS9120B Certifed
- Audited supply chain
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- HAZMAT Certified
- ITAR and DDTC Registered
Product Properties
Description
Electrical Resolver
Body Material
steel, stainless
Body Style
standard round c
Shoulder Diameter
0.9995in. and 1.0000in.
Pilot Diameter
0.6245in. and 0.6250in.
Overall Length
2.4170in. and 2.4210in. ⁓2-27/64"
Flange Diameter
1.0570in. and 1.0650in.
Flange Thickness
0.0930in.
Undercut Diameter
0.9750in.
Undercut Width
0.0500in.
Shaft Diameter
0.1870in. single shaft and 0.1872in. single shaft
Shaft Length
0.5550in. single shaft
Fragility Factor
moderately rugged
Body Size
11
Rotor Input Voltage Rating In Volts
100.0
Frequency In Hertz
10000.0
Rotor Input Current Rating
26.0 milliamperes
Rotor Input Electrical Power Rating
1.4 watts
Zro Impedance Magnitude In Ohms
3870.00
Zro Impedance Angle In Deg
65.80
Rotor Dc Resistance In Ohms
21.00
Stator Dc Resistance In Ohms
4.20
Phase Shift Angle In Deg
0.400 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt
58.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt
78.00
Electrical Error Angular Range In Minutes
-3.0/+3.0
Spline Tooth Quantity
21 single shaft
Alignment Hole Quantity
4
Pilot Length
0.0620in.
Shoulder Length
0.0930in.
Mounting Surface To Terminal End Distance
1.8620in. and 1.8640in.
Spline Tooth Diametral Pitch
120 single shaft
Shaft Thread Series Designator
unf single shaft
Shaft Thread Direction
RIGHT-Hand single shaft
Shaft Thread Class
2a single shaft
Terminal Location
rear
Shaft Thread Length
0.1900in. single shaft
Shaft Type
spline w/threads single shaft
Alignment Hole Depth
0.1250in.
Transformation Ratio
0.462 rotor to stator
Alignment Hole Bolt Circle Diameter
0.8120in.
Shaft Nominal Thread Size
0.190in. single shaft
Terminal Type And Quantity
8 screw
