Serving our customers with quality and safety first.
extruded
0.375in.
16.000 feet
1.160in.
1.160in.
0.093in.
0.093in.
h shape
0.750in.
0.510in.
0.750in.
0.510in.
0.250in.
square end
0.020in.
0.020in.
err default
err default
err default
err default
not identical
square w/ inner and outer corner radii
not identical
left taper length
not identical
err default
90.0 degrees
90.0 degrees
90.0 degrees
90.0 degrees
2nd tip offset 0.093 in. outside; bottom flanges 0.080 in. thk, 13.0667 deg taper tips; tensile strength 22000 psi min, 30000 psi max; hardness webster scale 8.0 min, 11.0 max; dp matte fin.; fillet radius where bottom left flange joins web flange, 0.046 in.; fillet radius where bottom right flange joins web flange, 0.046 in.
T-52 solution heat treated
aluminum alloy, QQ-A-200/9
aluminum alloy 6063
QQ-A-200/9 fed spec 1st material response
anodize
anodized
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: for the letter h, both flanges of the h section are equal or longer than the width measured along the axis of the web; for the letter i, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters t and z, on nonferrous type, the web is usually at right angles to the flanges. Letter h section may have a maximum of 5 percent slope on the inside face of the flanges.
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Item does not contain precious metal.
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.