Adhesives FSG 80 — FSC 8040

NSN
NIIN
Name
Details
01-445-4860
Adhesive
Fast-tacking, synthetic elastomer base, non-flammable adhesive for polyurethane or latex foam, specially designed for use with low air pressure spray equipment
01-445-5329
Adhesive
01-445-7215
Adhesive Primer
Used on pacer special.
01-445-7996
Adhesive
01-445-8697
Adhesive
01-446-0912
Adhesive
Ethyl cyanoacrylate; thixotropic gel
01-446-1122
Adhesive
01-446-1159
Adhesive
Used on intercom amplifier, sci systems inc. intended as adhesives, sealants or a gasket forming meterial where low volume resistivity or bleed off of static electricity is required, flexible, electrically conductive
01-446-1775
Adhesive
Used on pacer special.
01-446-1776
Adhesive
Used on pacer special.
01-446-2425
Adhesive
Used on pacer special.
01-446-4780
Adhesive
Modified bismaleimide; 0.10 psf weight; cures at 350 deg f for 1 hour, post cure at 475 deg f for 2 hours; for service temperatures up to 550 deg f; must be shipped
01-446-6143
Adhesive
01-446-7381
Adhesive
Non-sag; high peel
01-446-7842
Adhesive
01-447-8206
Adhesive
Self-curing; mildew, water
01-448-0418
Adhesive
Used on pacer special.
01-448-1365
Adhesive
01-448-4791
Adhesive Primer
01-448-6479
Adhesive Primer
01-448-7564
Adhesive
Self-leveling; water resistant; service temperature range of minus 40 to plus 200 deg f
01-449-0978
Adhesive
Service temperature range of minus 60 deg c to plus 175 deg c; color changes from light green mixed uncured to clear reddish-amber when fully cured
01-449-2316
Adhesive
Glass carrier; ship
01-449-3552
Adhesive
01-449-3913
Adhesive
01-449-4989
Adhesive
May be combined with reinforcing materials for modified properties
01-449-9119
Adhesive
600 cp viscosity; 0.17 mm gap fill; 3400 psi shear tensile strength; -80 to 80 deg c temp range; surface insensitive
01-450-1429
Adhesive
01-450-4013
Adhesive
Thixotropic paste; non-corrosive
01-450-5419
Adhesive
Thixotropic paste; non-corrosive
01-450-6545
Adhesive
Thixotropic paste; non-corrosive
01-450-6910
Adhesive
Room temperature cure; thixotropic; for service temperatures up to 300 deg f
01-450-7935
Adhesive
01-450-8536
Gasket Cement
01-450-9184
Adhesive
Thixotropic paste; non-corrosive
01-450-9187
Adhesive Primer
01-450-9342
Adhesive
Fire retardant acrylic film adhesive protected with a dual liner system. one liner is an easy strip disposable paper
01-451-0287
Adhesive
Long pot life; elevated temperature cure
01-451-2683
Adhesive
Thermally conductive; electrically insulating
01-451-3681
Adhesive
01-451-9464
Adhesive
01-452-0836
Adhesive
Foaming type; non-asbestos; unsupported; 0.050 in. thickness; cures at 250 or 350 deg f; must be shipped
01-452-2378
Adhesive
01-452-4152
Adhesive
16 x 24 in. sheet; 0.05 in. thickness; foaming syntactic; cures at 250 deg f
01-452-5539
Adhesive
Non-metallic filler; thixotropic
01-452-7243
Adhesive
Non-woven lightweight mat carrier; 0.06 psf weight; cures at 250 to 300 deg f; refrigerated or frozen storage required
01-453-0422
Adhesive
Fire resistant adhesive, temperature limits are M20 deg f to 20 deg f
01-453-8484
Adhesive Primer
Xylene solvent base
01-454-1050
Adhesive
01-454-7393
Adhesive Primer
Polymeric solution; moisture curing; color changes to pink when cured
Page: 39 ...