7025015069917
Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
7025-01-506-9917 Specification Set by the OEM (see RNCC code 3)
12.0
-40.0/+70.0 deg celsius
icas, electric power generation system
external
frequency response: 30hz - 20khz (LINE-Out) , signal to noise ratio: 90 db, total harmonic distortion @ 1 rms (10 kohm load) : 0.01%, sampling rate for playback/recording (stereo) : 4 khz - 48 khz, supply voltage requirement (loading) : +5, +12, -12 volt, current consumption (typical) : 250, 500, 50 ma respectively, microphone impedance: 600 ohms, LINE-In impedance: 47 kohms, cd AUDIO-In impedance: 50 kohms, microphone sensitivity: 10 - 200 mvpp, LINE-In sensitivity: 0 - 2 vpp, cd AUDIO-In sensitivity: 0 - 2 vpp, ad/da resolution: 16 bits
Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM
Identification Item Identification Guide (IIG) and Item Name Code (INC)
Definition Definition of approved item name (AIN): "INTERFACE UNIT,AUTOMATIC DATA PR"
A self-contained item which permits the transfer of information between various types of computer support equipment and computers which would not otherwise be compatible. Excludes modem, communication; expander card, computer, automatic data processing; circuit card assembly; and cable assembly (as modified).
Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Packaging Codes
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
7025-01-506-9917 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Item does not contain precious metal.
Adp accessorial equipment. Represents accessorial equipment which is considered to be a component, device, or unit that is related directly to and essential in the operation of adpe. Included in this class are complete units and components of related general purpose accessorial equipment which are used as part of a system such as weapon system, control system, missile system, communications system, or navigational system. It also encompasses various units or devices and associated control units that are used in combination or conjuction with the adpe configuration but are not part of the configuration itself.
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Identification Codes
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
