6540014139101
Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
6540-01-413-9101 Specification Set by the OEM (see RNCC code 3)
generator ophthalmic lens single phase 50/60 hz 115/230 1150w
lens surface generator; table top unit w/international capability; 115v ac, single phase w/ground and 10 amp service, 230v ac, single phase w/ ground and 5 amp service; 50/60 hz; 27 in. w by 28 in. d by 15 in. h; capable of cutting curves for the majority of lens prescriptions and to include the extended ranges from +8 through plano to -20 diopters in .01 diopter increments; cross curves generated to 10 diopters; prism up to 10 diopters cut w/o prism marking, blocking or rings; cuts up to 90mm in dia. and 20mm in thickness; c/o pneumatic chuck; control panel; integral keypad incl. start, stop and chuck buttons; computer controlled PC386Sx w/512k memory and a 80387 math CO-Processor 3 axis contouring machine; video monitor; full size keyboard; 70 psig clean, dry compressed air, low consumption; vacuum 200 cfm at 7.0in. of water; for cutting CR-39, polycarbonate and high index lenses free of elliptical error; finishes and polishes for optical clarity
Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM
Identification Item Identification Guide (IIG) and Item Name Code (INC)
Definition Definition of approved item name (AIN): "GENERATOR,OPHTHALMIC LENS"
An item designed to grind lens blanks with an abrasive wheel to a prescribed curve and thickness in rough finished form.
Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims
Special requirement. see specific instructions or drawings provided.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Special requirements.
Packaging Codes
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
6540-01-413-9101 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Item does not contain precious metal.
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Identification Codes
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
