Serving our customers with quality and safety first.
ac
60.0 hertz
1.050
straight side, s
S-8
single contact bayonet candelabra
3.5
clear
lamp 6; pad, ink 3; pad, assembly, line 6; sponge 3
115.0 volts
flat
err default
20.00 pounds
0.950 cubic feet
1
24 watts; w/electrically illuminated projection system, mechanical lens marking device and protractor w/two o deg to 180 deg axis scales around the circumference; each scale identified near o deg and 180 deg meridian graduations w/corresponding minus and plus cylinder markings; the minus cylinder graduations and markings in red counterclockwise in ascending fashion across the bottom half of protractor scale; plus cylinder graduations and markings in black clockwise in ascending fashion across the top half of scale; for marking center and axis on the lens blank for grinding; for replacement lamp order 6240-00-014-2458
aluminum
1
0.950 cubic feet
20.00 pounds
No part numbers found for this NSN.
An instrument for marking the cutting axis and center on single vision and multifocal lenses. For instruments used for measuring lens characteristics, as well as for marking the cutting axis and center, see lens measuring instrument, ophthalmic.
Special requirement. see specific instructions or drawings provided.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Special requirements.
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Item does not contain precious metal.
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.