Serving our customers with quality and safety first.
10429
portable
err default
ultrasonic unit blood flow detection 115/120v 50/60 hz doppler
115.0 or 120.0
115/120 volt; 50/60 hz, ac; multipurpose; suitable f/use as a blood flow detector in a variety of surgical/clinical applications; f/monitoring doppler sounds of blood flow on the principle blood vessels of the arms/legs by varying an audible pitch frequency as blood flow welocity changes; operable from either internal batteries or line power w/low battery power alarm; portable; self contianed; w/small flat probe f/taping to skin over desired blood vessel; operates at constant PRE-Tuned freqency of approx. 5.3mhz; probe cable, approx. 8 ft/electrically shielded f/safety and prevention of electrical interference; gas sterilized
50.0 or 60.0
A self-contained, portable unit consisting of an electrically shielded probe cable. It is designed for use as a peripheral blood flow detector and monitor on the principle blood vessels of the arms and legs by varying an audible pitch frequency as blood flow velocity changes. It may be used also as a multipurpose doppler ultrasound instrument for use in a variety of surgical and clinical procedures.
Special requirement. see specific instructions or drawings provided.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Special requirements.
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.