6110011010053
Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
6110-01-101-0053 Specification Set by the OEM (see RNCC code 3)
a/M32A-86
consists of 5 bulbs; 1 button; 1 nameplate; 2 rings; 2 snap switches; 5 lights; 1 OV-Undf board; 12 rubber mounts; 1 terminal block; 1 OV-Undv board; 1 wiring harness; 1 mem and t.d. assy board; 3tube sockets; 6 rivet blinds; 3 spring rel rtnr; 3 relays; 1 grommet; 1 resistor; 32 nuts; 46 washers; 3 brackets; 1 toggle switch; 2 fuses; 1 connector; 2 fuse holders; 18 screws; 1 sub assy prot. rly tray
Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM
Identification Item Identification Guide (IIG) and Item Name Code (INC)
Definition Definition of approved item name (AIN): "CONTROL BOX,GENERATOR SET"
An inclosure specifically designed to mount electrical control equipment for operation of generator sets, motor-generators, and the like, such as mode switches, circuit breakers, voltmeters, regulators, terminals and/or terminal boards and the like. It is designed to be attached to the generator set or like electrical equipment. The control components may or may not be included. It may also include or mount engine instruments, and/or controls. It may include a cover or door. For inclosures which include only circuit breakers, switches, jacks, fuse holders, terminals, and/or terminal boards, see circuit breaker box; switch box; jack box; fuse box; and terminal box. For inclosures primarily designed to interconnect two or more electrical or electronics items, except primary power sources, see interconnecting box. Excludes junction box; distribution box; and control box, electrical, vehicular heater.
6110-01-101-0053 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Item does not contain precious metal.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Identification Codes
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
Material Management Material categorization and source of supply
Warner-robins air logistics center 455 byron st robins afb, ga 31098-1860
Generators and generator sets, ground
Material Codes
SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.
SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.
MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.
MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category
IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.
