01-275-6613
Motor Armature
228.0000" overall length shunt dc motor; 5000 hp; 145 rpm; 750 v; 5400 amp, 150 per cent current; design temperature is 50c; heat exchanger is double-tube type; bearings are self-lubricated; coupling end bearing, no internal sump, requires 7.5 gpm at 100 plus/minus 20f; commutator end bearing - 15.0 x 7.4, 33.3 gallons; main fans - 3 each - 30 hp, 3545 rpm, 460 v, 34.9a, 30-60 hz, 1:15, service factor - 39, 360 cfm total; ambient temperature - 50 degrees c; rotation is counterclockwise; rotor
01-275-6755
Direct Current Motor
01-275-6779
Stepping Motor
Four wire leads 6.250 in. l; sleeve over leads 5.500 in. lg.; connector to be assembled
01-275-7049
Alternating Current Motor
01-275-7050
Alternating Current Motor
01-275-7051
Alternating Current Motor
01-275-7052
Alternating Current Motor
2a single end thread class right-hand single end 0.594" single end thread length unf single end thread series
01-275-7053
Alternating Current Motor
01-275-7172
Motor Stator
5.498" inside diameter
01-275-7698
Direct Current Motor
01-275-8959
Alternating Current Motor
01-275-8965
Alternating Current Motor
01-275-8966
Alternating Current Motor
01-275-8967
Alternating Current Motor
01-275-9648
Alternating Current Motor
01-275-9660
Control Motor
01-275-9750
Alternating Current Motor
01-275-9751
Alternating Current Motor
01-275-9752
Alternating Current Motor
01-275-9753
Alternating Current Motor
01-275-9754
Alternating Current Motor
01-275-9755
Alternating Current Motor
01-275-9756
Alternating Current Motor
01-275-9757
Alternating Current Motor
01-276-0585
Alternating Current Motor
01-276-0655
Stepping Motor
5 v dc; 2.9 amperes per phase; 1.8 deg. stepper angle; 100-ounces torque rating
01-276-0663
Alternating Current Motor
Consist of bracket for mounting
01-276-0665
Alternating Current Motor
01-276-0666
Alternating Current Motor
01-276-0995
Alternating Current Motor
01-276-0996
Alternating Current Motor
01-276-0997
Alternating Current Motor
01-276-1945
Alternating Current Motor
Used on ais test station, 2212300-001, f-16 acft. this motor is designed to also operate at 50hz with corresponding derating values
01-276-1946
Alternating Current Motor
01-276-2589
Alternating Current Motor
0.420" single end thread length 20 single end thread quantity per inch unc single end thread series
01-276-2910
Stepping Motor
01-276-3955
Alternating Current Motor
01-276-5044
Alternating Current Motor
01-276-5045
Alternating Current Motor
01-276-5046
Alternating Current Motor
2a single end thread class right-hand single end 0.750" single end thread length shaft style two 1.250 in. dia; shaft third style 1.375 in. dia unf single end thread series
01-276-5047
Alternating Current Motor
01-276-5049
Alternating Current Motor
01-276-5362
Alternating Current Motor
1.500" single end thread length shaft end first style has 0.281 in. dia drill thru hole; shaft end second style 1.562 in. diameter unc single end thread series
01-276-7127
Stepping Motor
01-276-7590
Electric Motor Support
Used on 2410-01-253-2118. rectangular shaped; w/ 2 cut-outs
