NSN 6105-00-635-2180 NIIN 006352180 — Control Motor

Home » FSG Index » FSG 61 - And Power And Distribution Equipment Electric Wire » FSC 6105 - Electrical Motors » NSN 6105-00-635-2180

NSN

Item Name

Assigned

DEMIL

Shelf Life

UOM

Using Services

NSN:

		6105-00-635-2180
6105006352180

Description:

MOTOR,CONTROL

NSN Assigned:

01-JAN-63

DEMIL:

Shelf Life:

N/A

UOM:

1 EA

Using Services:

Navy

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Serving our customers with quality and safety first.

AS9120 Certified
Audited supply chain
ITAR Registered
DDTC Registered
HAZMAT Certified
Customer service objectives
Every product 100% inspected

6105-00-635-2180 Specification Set by the OEM (see RNCC code 3)

Overall Height AAJT:

2.813in.

Overall Length AAJU:

4.031in.

Overall Width AAJV:

2.375in.

Thread Length AASA:

0.120in. first end ⁓1/8"

Taper Length ABND:

0.179in. first end and 0.189in. first end

Flatted Portion Length ABXQ:

0.3120in. second end

Current Type ACDC:

ac input

Flat Depth AGRB:

0.1400in. second end

Mounting Method AXGY:

pad

Mounting Facility Type And Quantity AXHR:

8 unthreaded hole

Cooling Method BFMF:

nonventilated

Control Field Current Rating In Amps BFMJ:

0.335

Control Field Impedance Rating In Ohms BFMK:

313.0

Control Field Winding Type BFML:

two windings, series connected

Current Rating Method BKPB:

no load

Torque Rating And Type BKPH:

3.0 INCH-Ounces stalled

Inclosure Specification BKPQ:

commercial

Control Field Voltage Type And Rating In Volts BKPS:

115.0 ac

Features Provided CBBL:

single phase adaptability and horizontal mounting position and vertical mounting position

Nominal Thread Size CQJX:

0.112in. first end ⁓1/8"

Taper CQRR:

7.500 per foot inin. first end

Length Of Shaft From Housing CWCS:

0.531in. second end

Temp Rating CWDY:

65.0 ambient deg celsius and -55.0 operating deg celsius and 55.0 operating deg celsius

Rotor Speed Rating In Rpm CWFX:

11400.0 single no load

Nominal Center To Center Distance Between Mounting Facilities Parallel To Width CWFY:

2.437in.

Nominal Center To Center Distance Between Mounting Facilities Parallel To Height CWGD:

2.437in.

Current Rating In Amps CWGL:

0.220 single input

Connection Type And Voltage Rating In Volts CWGQ:

115.0 line to neutral single input

Shaft End Characteristic CWHZ:

A5 single style second end

Phase FAAZ:

single input

Special Features FEAT:

mtg holes spotface 0.312in. dia irregularly spaced on 2.437 in. bolt circle

Frequency In Hertz FREQ:

400.0 input

Thread Series Designator THSD:

unf first end

Terminal Type And Quantity TTQY:

4 screw

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number

Cage

RNCC

RNVC

DAC

RNAAC

Status

MSDS

SADC

Part Number:

DPJJD787-278

Cage Code:

73693

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

238943

Cage Code:

1PQF4

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

1-723630-00

Cage Code:

88818

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

FPE25-155-1

Cage Code:

88818

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

238943

Cage Code:

36378

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC

FIIG

Concept No.

App. Key

Cond. Code

Status

INC:

19258

FIIG:

A271A0

Concept No.:

App. Key:

Cond. Code:

Status:

Definition Definition of approved item name (AIN): "MOTOR,CONTROL"

A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also servomotor, automatic pilot.

Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims

Pack Size

Pack Weight

Item Weight

Item Dim.

Pack Size:

Paclk Weight:

5.4000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

6105-00-635-2180 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC

PMIC

ESD

ENAC

ADPE

CRITL

HMIC:

PMIC:

ESD:

ADPE:

CRITL:

Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) A

Item does not contain precious metal.

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Identification Codes

HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.

PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.