5860001441629
Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
5860-00-144-1629 Specification Set by the OEM (see RNCC code 3)
output characteristics, power greater than 3.0 mw, wavelength 632.8 nm, traverse mode temoo, beam characteristics, dia at 1/E2 points 1.25mm, divergence full angle less than 0.75 mrad, static alignment to outer cylinder beam centering less than porm 0.010 in., beam parallelism less than 5 mrad, polarization linear to better than one part in 1000, angular drift from cold start at 25 deg c is less than 0.2 mrad, after 15 min warm&up less than 0.03 mrad, resonator characteristics, configuration hemispherical for max stability, lg 29.7 cm, axial mode spacing 505 mhz, power output stability at ambient environmental conditions, long term drift less than porm 5 pct, mode sweeping contribution less than 0.1 mw, beam noise at 1 khz to 1.0 mhz is less than 1 pct rms, warm&up time at 3.0 mw is 5 min max, environmental capability, operating temp range 0 to 50 deg c, altitude sealed to 10, 000 ft, humidity 0 to 100 pct, non&operating temp range minus 65 to plus 80 deg c, non&operating altitude is sea level to 70, 00
Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM
Identification Item Identification Guide (IIG) and Item Name Code (INC)
Definition Definition of approved item name (AIN): "LASER,GAS"
A hollow tubular resonant cavity with mirrors at one or both ends, containing a gas which may be excited by a radio frequency field or a direct current pulse to produce laser radiation through nonreflective areas at the ends of the cavity. It is normally continuous operating.
5860-00-144-1629 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious metal content is unknown
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Identification Codes
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
Material Management Material categorization and source of supply
Ogden air logistics center 5851 f ave hill afb, ut 84056-5713
Telecommunications
Material Codes
SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.
SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.
MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.
MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category
IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.
