5820015207245
Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
5820-01-520-7245 Specification Set by the OEM (see RNCC code 3)
120.0 ac
encased
9.000in.
7.000in.
4.000in.
multi frequency tone remotes
off white color; audio output to speaker 2 watts min, in compression, into 8 ohms with less than 3 pct distortion using supplied power pack; compression less than 3 db increase in output with 30 db increase beyond threshold of compression; line input adjustable minus 20 dbm min; frequency response porm 3 dbm from 300 to 3000 hz except at notch frequency; 1000 hz reference; signal to noise 50 db; line IMPEDENCE600 ohms/5000 ohms; line output adjustable plus 15 dbm max; factory set at 0 dbm; control tones security tone 2175 hz porm 0.01 pct at plus 10 dbm for 140 ms; function tones 1950-450 hz porm 0.01 pct at 0 dbm for 40 ms; monitor 2050 hz porm 0.01 pct at 0 dbm for 40 ms; transmit hold tone 2175 hz porm 0.01 pct minus 20 dbm for duration of ptt; connections 4 pin modular for handset; RJ11 for desk microphone and phone pair; 4 wire simplex OPERATION-Separate tx and rx pairs
60.0
provide control of up to 4 frequencies on a remotely located base station radio over a voice grade wire pair; use with TTP1-4W termination panel
Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM
Identification Item Identification Guide (IIG) and Item Name Code (INC)
Definition Definition of approved item name (AIN): "CONTROL,RADIO SET"
A single component that determines the mode of operation of a radio set.
5820-01-520-7245 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Identification Codes
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
