01-126-6246
Ring Spacer
4.238" inside diameter anodize surface treated
01-126-7027
Lock Serrated Ring
Cadmium surface treated
01-126-7028
Lock Serrated Ring
Cadmium surface treated
01-126-7037
Sleeve Spacer
0.2125" overall length 17c solid, plain, no outside flanges
01-126-7287
Ring Spacer
Used on UH-60. 0.439" inside diameter 30 degree taper on outside, 45 degree taper inside on opposite end passivate surface treated
01-126-7374
Machine Thread Plug
3a external thread class right-hand external 0.820" overall length anodize surface treated unjef external thread series
01-126-7474
Ring Spacer
0.688" inside diameter
01-126-7515
Plate Spacer
Used on 2350-01-045-1123. 2.500" overall length 1.000" overall width rectangular
01-126-7828
Plate Spacer
Square outside corners at bottom
01-126-8421
Sleeve Spacer
Flange dia relieved to 0.998 in. min 1.000 in. max dia 0.098 in. min 0.100 in. max deep on both sides
01-126-8424
Plate Spacer
0.375" hole diameter 8.000" outside diameter 8 bolt hole quantity circular
01-126-8491
Machine Thread Bushing
Right-hand 1.500" overall length 12 thread quantity per inch material per williams intl 03-570, heat treat per williams intl p 1204, surface treatment per williams intl p 3610 unjf thread series
01-126-8689
Sleeve Spacer
01-126-8702
Machine Thread Bushing
01-126-8708
Shim
2.017" outside diameter
01-126-8709
Shim
1.328" outside diameter passivate surface treated circular
01-126-8912
Machine Thread Plug
01-126-8990
Sleeve Spacer
Gray anodize or blue chromate
01-126-8991
Sleeve Spacer
01-126-8994
Shim
1.060" outside diameter color yellow circular
01-126-8996
Plate Spacer
0.123" hole diameter 0.690" overall length 0.250" overall width 2 bolt hole quantity non-circular w/square corners
01-126-8997
Plate Spacer
0.156" hole diameter 0.875" overall length 0.375" overall width 2 bolt hole quantity
01-126-9537
Ring Spacer
Used on mrap - common nsn - maxxpro cat i and 2 other weapon systems. 1.890" inside diameter
01-126-9544
Lock Serrated Ring
Used on ch-47 turbine engine, rotary wing aircraft.
01-126-9574
Ring Spacer
Used on mrap - common nsn - 2 mrap variants and 1 other weapon system.
01-126-9944
Sleeve Spacer
01-126-9946
Shim
1.990" outside diameter circular
01-126-9947
Ring Spacer
0.1875" inside diameter
01-126-9950
Plate Spacer
0.189" hole diameter 0.931" overall length 0.807" overall width 4 bolt hole quantity all holes countersunk one side only 82 deg to 0.344/0.360 dia non-circular w/bolt holes
01-126-9951
Plate Spacer
0.562" hole diameter 4.500" overall length 3.120" overall width 2 bolt hole quantity non-circular w/square corners
01-127-0836
Plate Spacer
1.563" hole diameter 14.000" overall length 12.000" overall width 4 bolt hole quantity grease fitting holes non-circular w/bolt holes
01-127-0963
Sleeve Spacer
01-127-0964
Sleeve Spacer
01-127-0968
Shim
0.495" outside diameter circular
01-127-0969
Ring Spacer
1.045" inside diameter passivate surface treated
01-127-0970
Plate Spacer
0.281" hole diameter 3.625" outside diameter 6 bolt hole quantity bolt holes countersunk 82.0 deg; outside edge tappered to 3.565 in. dia
01-127-0974
Shim
0.530" outside diameter
