01-078-0285
Machine Thread Bushing
Right-hand 3.125" overall length 18 thread quantity per inch unef thread series
01-078-0287
Sleeve Spacer
0.2400" overall length chromium surface treated 17c solid, plain, no outside flanges
01-078-0289
Plate Spacer
1.528" overall length 7 bolt hole quantity
01-078-0291
Plate Spacer
0.281" hole diameter 1.528" overall length 1.528" overall width 4 bolt hole quantity one 0.187 in. dia hole
01-078-0526
Sleeve Spacer
0.1400" overall length 17c solid, plain, no outside flanges
01-078-0527
Sleeve Spacer
0.6250" overall length 17c solid, plain, no outside flanges
01-078-0530
Sleeve Spacer
0.2970" overall length 22c solid, external flange one end
01-078-0532
Shim
1.100" outside diameter circular
01-078-0533
Shim
1.100" outside diameter circular
01-078-0534
Shim
1.100" outside diameter circular
01-078-0536
Plate Spacer
0.900" outside diameter 6 lugs equally spaced 0.100 in. w tapered to 0.060 in. x 0.0687 in. lg
01-078-0880
Sleeve Spacer
01-078-0881
Sleeve Spacer
01-078-1182
Externally Threaded Ring
Used on 2350-01-087-1095 xm1 tank. 2a thread class right-hand 1.875" bore diameter
01-078-1183
Eccentric Bushing
Used on m1,m1a1,xm1 gps,m1 gps oip.
01-078-1253
Tapered Bushing
0.695" inside diameter 0.750" overall length
01-078-1277
Shim
0.4600" hole diameter 5.1200" overall length 2.5000" overall width 4 bolt hole quantity
01-078-1295
Plate Spacer
0.406" hole diameter 2.500" overall length 1.000" overall width 2 bolt hole quantity non-circular w/beveled corners
01-078-1296
Plate Spacer
0.420" hole diameter 5.120" overall length 2.500" overall width 4 bolt hole quantity non-circular w/rounded ends
01-078-1330
Plate Spacer
Used on 2350-00-873-5408. consists of bushing-12001633; adapter, mount-12001631; bushing-12001632
01-078-2090
Externally Threaded Ring
2a thread class right-hand 0.250" overall length 1.305" bore diameter passivate surface treated
01-078-2241
Shim
4.760" overall length 2.240" overall width rectangular
01-078-2365
Shim
0.195" outside diameter circular
01-078-2603
Machine Thread Bushing
Right-hand 0.286" overall length 24 thread quantity per inch wrenching facility internal oxide surface treated unf thread series
01-078-2608
Sleeve Spacer
1.0940" overall length 17c solid, plain, no outside flanges
01-078-2609
Sleeve Spacer
0.0410" overall length 17c solid, plain, no outside flanges
01-078-2610
Shim
1.485" outside diameter cadmium surface treated
01-078-2611
Shim
0.203" hole diameter 0.615" outside diameter washer, flat-shim stock, special circular
01-078-2612
Shim
0.465" outside diameter this part is in the primary aircraft control system any incorrect part could cause loss of life, all dimensions with tolerances indicated to be tighter than block tolerances must be 100 percent inspected passivate surface treated
01-078-2613
Shim
0.465" outside diameter this part is in the primary aircraft control system any incorrect part could cause loss of life, all dimensions with tolerances indicated to be tighter than block tolerances must be 100 percent inspected circular
01-078-2614
Shim
0.320" outside diameter passivate surface treated circular
01-078-2615
Shim
0.320" outside diameter passivate surface treated circular
01-078-2617
Shim
0.250" outside diameter passivate surface treated circular
01-078-2619
Shim
0.250" outside diameter passivate surface treated circular
01-078-2621
Shim
0.250" outside diameter passivate surface treated circular
01-078-2623
Shim
0.375" outside diameter passivate surface treated circular
01-078-2624
Shim
0.375" outside diameter passivate surface treated circular
01-078-2625
Shim
0.375" outside diameter passivate surface treated circular
01-078-2627
Ring Spacer
0.394" inside diameter this part is in the primary aircraft control system any incorrect part could cause loss of life all dimensions with tolerances indicated to be tighter than block tolerances must be 100 percent inspected
01-078-2629
Plate Spacer
2.500" overall length 0.440" overall width
01-078-2630
Plate Spacer
4.750" overall length 0.875" overall width has two 0.164-32 in. unc-2b thded holes on 4.250 in. mtg centers passivate surface treated
01-078-2810
Sleeve Spacer
0.7500" overall length 17f hexagon, plain, no outside flanges
01-078-3041
Sleeve Spacer
01-078-3043
Shim
4.040" outside diameter six slots on outside diameter, equally spaced on a 3.750 in. bolt circle. each slot is basically round, 0.250 in. dia, with a 90.0 deg slot to the o.d. the outside gap opening is 0.375 in. also has two other holes, 0.094 in. dia, on the same bolt circle, oppositely spaced, positioned 15.0 deg from the nearest slot
01-078-3421
Sleeve Spacer
3.0000" overall length 17c solid, plain, no outside flanges
01-078-3422
Sleeve Spacer
0.8650" overall length 17c solid, plain, no outside flanges
01-078-3423
Sleeve Spacer
0.2400" overall length 17c solid, plain, no outside flanges
01-078-3424
Shim
0.495" outside diameter passivate surface treated circular
