00-600-7266
Machine Thread Plug
3a external thread class right-hand external 0.282" external thread length 0.734" overall length cadmium surface treated plug, machine unf external thread series
00-600-8376
Machine Thread Bushing
00-600-8910
Machine Thread Bushing
Right-hand 1.625" overall length 24 thread quantity per inch 0.625 in. w by 1.698 in. max, 1.692 in. min, dia unthreaded portion on end opposite drive end phosphate surface treated uns thread series
00-600-8920
Machine Thread Bushing
Right-hand 16 thread quantity per inch unf thread series
00-600-9362
Shim
0.740" outside diameter passivate surface treated circular
00-600-9985
Machine Thread Plug
3a external thread class right-hand external 0.234" external thread length 0.8100" overall length anodize surface treated unf external thread series
00-601-0184
Machine Thread Bushing
00-601-1051
Machine Thread Plug
2a external thread class right-hand external 0.230" external thread length 0.720" overall length plug, machine unf external thread series
00-601-1073
Machine Thread Plug
3a external thread class right-hand external 0.720" overall length plug, machine unef external thread series
00-601-1933
Sleeve Spacer
4.1870" overall length cadmium surface treated 17c solid, plain, no outside flanges
00-601-2242
Machine Thread Plug
3a external thread class right-hand external 0.312" external thread length 0.531" overall length plug, machine unf external thread series
00-601-3232
Machine Thread Plug
00-601-3644
Machine Thread Plug
3a external thread class right-hand external 0.405" external thread length 1.020" overall length anodize surface treated plug, machine
00-601-4195
Machine Thread Bushing
Right-hand 2.440" overall length 16 thread quantity per inch unf thread series
00-601-5405
Plate Spacer
0.276" hole diameter 16.730" outside diameter 9 bolt hole quantity circular
00-601-7094
Shim
2.375" outside diameter circular
00-601-7189
Sleeve Spacer
0.1780" overall length anodize surface treated 22c solid, external flange one end
00-601-7329
Sleeve Spacer
0.4980" overall length passivate surface treated 17c solid, plain, no outside flanges
00-601-7471
Machine Thread Bushing
Right-hand 0.525" overall length 24 thread quantity per inch 0.098 in. w by 0.805 in. dia thd relief, no. 63 finish on id surfaces uns thread series
00-601-7480
Sleeve Spacer
0.3750" overall length cadmium surface treated 17c solid, plain, no outside flanges
00-601-7675
Externally Threaded Ring
Right-hand 0.812" overall length 2.078" bore diameter counterbored on end opposite drive end 0.312 in. deep by 2.362 in. dia; externally relieved on end opposite to drive end 0.132 in. deep by 2.748 in. od oxide surface treated
00-601-8190
Sleeve Spacer
0.1200" overall length chromate surface treated 17c solid, plain, no outside flanges
00-601-8276
Ring Spacer
0.751" inside diameter
00-601-8391
Sleeve Spacer
0.6210" overall length flanges located 0.140 in. from from each end 18c solid, external flanges both ends
00-601-8419
Sleeve Spacer
2.7450" overall length anodize or chromate surface treated
00-601-8475
Shim
0.098" hole diameter 0.938" outside diameter 2 bolt hole quantity circular
00-601-8618
Machine Thread Plug
2a external thread class right-hand external 0.475" external thread length 0.625" overall length plug, machine unf external thread series
00-601-9084
Shim
1.646" outside diameter passivate surface treated circular
00-601-9696
Tapered Bushing
0.376" inside diameter 0.687" overall length cadmium surface treated
00-602-0296
Axle Landing Gear Spacer
00-602-1150
Sleeve Spacer
3.8120" overall length 17c solid, plain, no outside flanges
00-602-2520
Nonmetallic Bushing
0.180" overall length 0.125" center hole diameter round
00-602-3541
Sleeve Spacer
Used on C-7A.
00-602-3626
Machine Thread Bushing
Right-hand 0.092" overall length 80 thread quantity per inch unf thread series
00-602-3660
Ring Spacer
18.520" inside diameter 12 holes equally spaced, 0.150 in. dia
00-602-5285
Machine Thread Bushing
Used on machine gun,cal. .50 (m2); nsn 1005-00-322-9715. right-hand 0.580" overall length 24 thread quantity per inch thread relief 0.260 in.dia x 0.06in.lg under head; bore broached out to 0.272 in.dia on 0.080 in.radius phosphate or phosphate zinc surface treated unf thread series
00-602-5741
Shim
1.625" overall length 1.250" overall width 1 bolt hole quantity
00-602-6850
Shim
0.233" hole diameter 2.550" overall length 2 bolt hole quantity non-circular w/corner radius
00-602-7081
Machine Thread Plug
3a external thread class right-hand external 0.234" external thread length 0.531" overall length passivate surface treated plug, machine unf external thread series
00-602-7837
Shim
0.875" outside diameter circular
00-602-7869
Shim
1.000" outside diameter circular
00-602-7905
Ring Spacer
1.375" inside diameter
00-602-8056
Shim
0.156" hole diameter 1.000" overall length 1.000" overall width 2 bolt hole quantity passivate surface treated non-circular w/square corners
00-602-8057
Shim
0.156" hole diameter 1.000" overall length 0.500" overall width 2 bolt hole quantity passivate surface treated non-circular w/square corners
00-602-8376
Shim
3.940" outside diameter 5 bolt hole quantity slot on inside dia
00-602-9479
Plate Spacer
Passivate surface treated
