00-409-4661
Sleeve Spacer
0.3450" overall length 17c solid, plain, no outside flanges
00-409-4662
Sleeve Spacer
0.4170" overall length gray anodize or blue chromate anodize or chromate surface treated 17c solid, plain, no outside flanges
00-409-4687
Sleeve Spacer
0.1100" overall length cadmium surface treated 17c solid, plain, no outside flanges
00-409-4700
Shim
0.900" overall length 0.750" overall width non-circular w/o bolt holes
00-409-5343
Shim
2.130" overall length 0.750" overall width non-circular w/o bolt holes
00-409-5348
Shim
1.500" overall length 1.500" overall width non-circular w/o bolt holes
00-409-5353
Shim
2.300" overall length 1.950" overall width non-circular w/o bolt holes
00-409-6835
Machine Thread Bushing
Right-hand 0.205" overall length 28 thread quantity per inch gold surface treated unf thread series
00-409-6907
Sleeve Spacer
0.1950" overall length passivate surface treated 17c solid, plain, no outside flanges
00-409-6909
Sleeve Spacer
0.5590" overall length phosphate surface treated 17c solid, plain, no outside flanges
00-409-6959
Sleeve Spacer
1.1750" overall length on one face only, the spacer sleeve is counterbored with a dia of 2.155 to 2.160 in. to a depth of 0.210 to 0.220 in.. after machining, separate into two pieces with 0.060 in. wide cut 18b segmented, external flanges both ends
00-409-6960
Machine Thread Bushing
Right-hand 1.620" overall length 14 thread quantity per inch unf thread series
00-409-6976
Sleeve Spacer
1.2000" overall length 21c solid, external flange
00-409-7602
Sleeve Spacer
0.2340" overall length 17c solid, plain, no outside flanges
00-409-8324
Ring Spacer
4.882" inside diameter
00-409-8363
Shim
1.125" outside diameter circular
00-409-8712
Machine Thread Plug
00-409-8984
Plate Spacer
0.563" hole diameter 9.563" overall length 1.500" overall width 2 bolt hole quantity non-circular w/corner radius
00-409-8987
Sleeve Spacer
0.2500" overall length 17c solid, plain, no outside flanges
00-409-9027
Nonmetallic Bushing
1.125" overall length 1.750" center hole diameter
00-409-9141
Externally Threaded Ring
0.125" overall length 0.3750" bore diameter
00-409-9142
Shim
0.090" hole diameter 0.830" overall length 0.170" overall width 2 bolt hole quantity groove located at right angle of bolt holes 0.275 in. min, 0.285 in.max center of bolt holes to center of groove, 0.070 in. min, 0.080 in. maxradius of groove
00-409-9143
Shim
0.090" hole diameter 0.830" overall length 0.170" overall width 2 bolt hole quantity
00-409-9565
Sleeve Spacer
00-409-9573
Ring Spacer Set
00-410-0527
Ring Spacer
1.567" inside diameter
