01-618-0685
Sleeve Spacer
Used on 2355226227966. 40.0mm overall length 17c solid, plain, no outside flanges
01-618-0691
Shim
6.000" overall length 0.188" overall width 2 bolt hole quantity shim guide adjustment, secondary door laminated steel; details refer to drawing 3037-1671 rectangular
01-618-0713
Sleeve Bushing
01-618-0716
Special Shaped Spacer
01-618-0717
Special Shaped Spacer
01-618-0806
Sleeve Spacer
01-618-0827
Sleeve Spacer
01-618-0836
Bushing Blank
Finish all over; brass copper alloy number 360; 3 drill holes 0.875" 21a-1 split, external flange, internal flange one end
01-618-0855
Shim
0.203" hole diameter 2.300" overall length 0.620" overall width bevel corners on outside periphery; for details refer to drawing L3400054 non-circular w/beveled corners
01-618-0860
Shim
0.203" hole diameter 2.300" overall length 0.620" overall width shim, wheel door switch-nose landing gear bevel corners on oustide periphery; details see drawing L3400054-007 non-circular w/beveled corners
01-618-0864
Nonmetallic Bushing
Used on c-5m aircraft. 2.22" overall length material ams 5305; 1.24" inwidth; 1.06" in height; inside diameter is 0.66"
01-618-1109
Straight Spacer
01-618-1132
Plate Spacer
Used on 2355-22-622-7966,truck,utility. 185.0mm overall length 16.0mm overall width shim rectangular
01-618-1262
Shim
0.530" hole diameter 12.120" overall length 3 bolt hole quantity shim 1/8
01-618-1491
Sleeve Spacer
Used on nsn 4320-01-507-0595. SPACER15 ld 315
01-618-1500
Sleeve Spacer
Used on nsn 4320-01-507-0595. spacer-LD326
01-618-1587
Shim
0.530" hole diameter 12.120" overall length 3 bolt hole quantity has finish; critical technology; ssn 688 class submarine no.2 periscope system bumpter-details
01-618-1628
Shim
0.530" hole diameter 12.120" overall length 3 bolt hole quantity shim has finish; critical technology; SSN688 class submarine no.2 periscope system bumper-details
01-618-1749
Sleeve Bushing
Used on c-5m aircraft.
01-618-2086
Sleeve Bushing
01-618-2160
Plate Spacer
Used on c5m aircraft. spacer
01-618-2164
Straight Spacer
Used on C-5M. spacer
01-618-2167
Sleeve Bushing
Used on c5m aircraft. 0.868" overall length bushing
01-618-2174
Sleeve Bushing
Used on c-5m; power plant; installation kit, bracket p/n 255-0732-501. 0.694" overall length bushing 17c solid, plain, no outside flanges
01-618-2197
Sleeve Spacer
Used on 5895-01-608-2698. 0.8125" overall length 17c solid, plain, no outside flanges
01-618-2350
Sleeve Spacer
01-618-2613
Shim
Used on C-5M. 8.750" overall length 1.000" overall width shim, laminated aluminum foil 1100 bonded to base 2024 clad, to 5052 base if 5052 aluminum foil used rectangular
01-618-2768
Plate Spacer
Used on av-8b aircraft.
01-618-2769
Shim Set
Used on av-8b aircraft.
01-618-2770
Shim Set
Used on av-8b aircraft.
01-618-2775
Shim Set
Used on av-8b aircraft.
01-618-2779
Shim Set
Used on av-8b aircraft.
01-618-2873
Sleeve Bushing
01-618-2972
Special Shaped Spacer
6 bolt hole quantity adapter, restraint differing bolt hole sizes; largest hole diamter 0.313"; height 3.170"; mark in accordance with mil-std-130; critical technology
01-618-3013
Special Shaped Spacer
Used on 1230-01-614-3412. washer spacer has a centrally located aperture with a diameter of 0.312 - 0.316", with a flat on one side of the aperature. passivate surface treated
01-618-3076
Straight Spacer
01-618-3078
Machine Thread Plug
01-618-3115
Straight Spacer
01-618-3123
Shim
Auxilliary spring shim
01-618-3334
Sleeve Spacer
Used on c-5 reliability enhancement re-engining program; engine assembly part number 1458m35g01; power plant. 0.375" overall length 17c solid, plain, no outside flanges
