01-603-9243
Sleeve Spacer
01-603-9248
Machine Thread Plug
Used on 2915-01-325-8315 fuel control, main, turbine engine. cap, shaft
01-603-9296
Externally Threaded Ring
01-603-9324
Nonmetallic Bushing
01-603-9434
Sleeve Spacer
Used on b-52 aircraft. spacer, bearing
01-604-0129
Plate Spacer
Used on 5805-01-582-2366. 1.59" overall length 0.60" overall width washer, rectangular for use with 91-2733507-2 chromate surface treated non-circular w/o bolt holes
01-604-0366
Straight Spacer
01-604-0482
Sleeve Spacer
Used on b-52 aircraft. 0.484" overall length spacer sleeve chemical film finish with blue dye chromate surface treated 17c solid, plain, no outside flanges
01-604-1142
Shim
0.215" hole diameter 1.750" overall length 0.490" overall width 2 bolt hole quantity anodize surface treated non-circular w/rounded ends
01-604-1184
Shim
Used on f250turd-2005 outboard engine. shim (t:2.00mm) ur used on shaft propeller p/n 69j-45611-00-00 circular
01-604-1333
Nonmetallic Bushing
Used on engine,outboard.
01-604-1539
Sleeve Bushing
Used on wiper,stbd wi. 3.000" overall length bushing 22a split, external flange one end
01-604-1654
Sleeve Spacer
01-604-1739
Sleeve Bushing
Used on engine,outboard. 0.875" overall length bushing
01-604-1790
Shim
Used on engine outboard f250btur 4 stroke std rtn. shim
01-604-1909
Sleeve Bushing
01-604-1968
Sleeve Bushing
01-604-2157
Sleeve Spacer
01-604-2315
Shim
Used on outboard, engine yamaha. shim (t:2.20mm) ur circular
01-604-2328
Sleeve Bushing
Used on outboard engine. bushing shift arm
01-604-2343
Sleeve Spacer
Used on wiper,stbd wi. 1.0" overall length spacer (rc models) 17c solid, plain, no outside flanges
01-604-2558
Bushing Blank
Used on wiper, stbd wi. 2.25" overall length bushing
01-604-2623
Ring Spacer
0.375" inside diameter
01-604-2657
Sleeve Spacer
Used on t182t skylane cessna aircraft; propeller.
01-604-2673
Sleeve Bushing
Used on ah-64db3 helicopter. bushing-socket
01-604-2760
Sleeve Spacer
Used on 2355015602306. spacer, pipe
01-604-2777
Seal Seat Sleeve
Used on engine, outboard. damper, water seal 2004 LZ300turc yamaha outboard lower casing drive
01-604-2823
Sleeve Spacer
Used on 1670-01-600-8309. 1.820" overall length spacer, 1.82lg anodize surface treated 17c solid, plain, no outside flanges
01-604-2847
Nonmetallic Bushing
Used on engine, boat. bushing, tilt arm round flanged
01-604-2854
Nonmetallic Bushing
Used on engine, boat. bushing, swivel case round flanged
01-604-2956
Bushing Blank
Used on engine outboard 60hp 4 cycle std rotation. 1.000" overall length bushing width 1.000 inch
01-604-2971
Sleeve Bushing
Used on b-2 tssp. sleeve, wear
01-604-3161
Shim Set
Used on wiper,stdbd wi. shim set
01-604-3167
Plate Spacer
Used on engine, outboard. washer, special
01-604-3194
Nonmetallic Bushing
Used on engine, boat. bushing
01-604-3212
Nonmetallic Bushing
Used on wiper,stbd wi. 1.25" overall length bushing (long)
01-604-3223
Straight Spacer
01-604-3240
Sleeve Spacer
Used on b-52 aircraft. spacer, sleeve 17c solid, plain, no outside flanges
01-604-3336
Machine Thread Plug
Used on wiper, stbd wi. screw, drain
01-604-3378
Sleeve Bushing
0.350" overall length bushing flanged passivate surface treated 22c solid, external flange one end
01-604-3395
Bushing Blank
Used on engine outboard 60hp 4 cycle std rotation. 1.250" overall length bushing width 1.250" height 0.250"
01-604-3411
Shim
Used on engine,outboard. shim circular
01-604-3412
Nonmetallic Bushing
Used on level wind assembly. bushing
01-604-3784
Sleeve Bushing
01-604-3802
Sleeve Bushing
Used on levelwind assy. bushing
01-604-4005
Bushing Blank
Used on engine outboard 60hp 4 cycle std rotation. 1.000" overall length bushing width 1.75" height 1.00 inch
