01-534-0055
Plate Spacer
0.375" outside diameter washer, flat circular
01-534-0386
Shim
Used on 1440-01-444-4239 launching station, guided missile semitrailer mounted. 1.554" outside diameter passivate surface treated circular
01-534-0411
Sleeve Spacer
Used on 3510015272209.
01-534-0605
Sleeve Spacer
Used on c-17a spt eqmt. 1.9700" overall length zinc surface treated 17c solid, plain, no outside flanges
01-534-0785
Nonmetallic Bushing
Used on waterjet, propulsor units u000003677 (inls). 8.0mm overall length
01-534-0895
Sleeve Spacer
Used on end item nsn: 2320-01-523-1054 armored version of the heavy equipment transporter (het).
01-534-0904
Sleeve Spacer
Used on slick aircraft magneto, four cylinder coupled. spacer, distributor
01-534-0976
Sleeve Spacer
Used on c17a spt eqmt. 3.9900" overall length bushing, sleeve zinc surface treated 17c solid, plain, no outside flanges
01-534-1052
Sleeve Spacer
01-534-1192
Straight Spacer
01-534-1234
Plate Spacer
Used on U-2. spacer
01-534-1238
Plate Spacer
Used on U-2. spacer
01-534-1240
Plate Spacer
Used on U-2. spacer
01-534-1242
Plate Spacer
Used on U-2. spacer
01-534-1243
Shim
Used on U-2.
01-534-1757
Sleeve Spacer
1.7918" overall length chromate surface treated 17c solid, plain, no outside flanges
01-534-1777
Special Shaped Spacer
01-534-1818
Machine Thread Magnetic Plug
Used on np-3; cooler lubricating. chip collector plug
01-534-1840
Bushing Blank
Used on c5 acft.
01-534-2158
Tapered Spacer
01-534-2188
Machine Thread Magnetic Plug
Used on ea-6b acft-j52 & j52-p-408a engines.
01-534-2243
Plate Spacer
Used on U-2. spacer, acft bulkhead
01-534-2273
Machine Thread Plug
Used on waterjet, propulsor units u000003677 (inls). mfr name: plug, oil drain
01-534-2293
Machine Thread Plug
Used on waterjet, propulsor units u000003677 (inls). mrf part name: plug, oil drain
01-534-2516
Sleeve Spacer
Used on c-17a spt eqmt. 0.6900" overall length bushing, sleeve zinc surface treated 17c solid, plain, no outside flanges
01-534-2567
Sleeve Spacer
01-534-2593
Plate Spacer
0.687" hole diameter 1.500" overall length 1.500" overall width shim, small non-circular w/square corners
01-534-2600
Plate Spacer
0.687" hole diameter 1.500" overall length 1.500" overall width shim, small non-circular w/square corners
01-534-2603
Plate Spacer
0.687" hole diameter 1.500" overall length 1.500" overall width shim, small non-circular w/square corners
01-534-2612
Plate Spacer
0.625" hole diameter 8.000" overall length 3.500" overall width 2 bolt hole quantity shim, large non-circular w/square corners
01-534-2807
Shim
Used on 20 ton tripod jack. 1.046" outside diameter circular
01-534-2895
Machine Thread Plug
Used on 3835-01-511-7335. plug tech data from tm 10-3835-241-14&p-2 section 0360 00-2 figure 25 p/n 3 plug, machine
01-534-2910
Straight Spacer
01-534-3237
Shim
Used on c-17a support equipment. 0.970" outside diameter item is altered from mcmaster carr p/n 3088A233 by adding zinc plate finish zinc surface treated circular
01-534-3242
Machine Thread Plug
Used on valve,actuator. plug, sae port assy w/ o-ring
01-534-3269
Sleeve Spacer
01-534-3304
Nonmetallic Bushing
Used on waterjet, propulsor units u000003677 (inls).
01-534-3364
Nonmetallic Bushing
Used on valve,actuator. bushing, thompson dimensions are 1/4" x 1/4"
01-534-3626
Nonmetallic Bushing
01-534-3715
Sleeve Spacer
01-534-3758
Machine Thread Plug
01-534-4013
Sleeve Spacer
Used on b1-b aircraft. 0.2400" overall length spacer-upper, wing piviot fairing 17c-1 solid, plain, no outside flanges, internal flange one end
01-534-4058
Sleeve Spacer
Used on 2320-01-523-1054.
01-534-4061
Sleeve Spacer
Used on gear coupling. full flex spacer couplings are used for (4 ) bearing installations w/ extended shaft seperations: limted end float (lef) spacer couplings are used for sleeve bearing motor applications
01-534-4187
Sleeve Spacer
Used on main engine governor ug8.
01-534-4264
Straight Spacer
01-534-4281
Machine Thread Plug
Used on swing check valve 1"-1.5".
01-534-4294
Machine Thread Plug
Used on swing check valve 2"-8".
