01-527-5198
Shim
Used on m192 lwgm. 1 bolt hole quantity
01-527-5236
Sleeve Spacer
Used on fwd fuselag. 1.0106" overall length spacer, sleeve use for screw or bolt diameter .1640 chromate surface treated 17c solid, plain, no outside flanges
01-527-5361
Sleeve Spacer
1.7137" overall length 17c solid, plain, no outside flanges
01-527-5514
Shim
Used on NE-2C.
01-527-5519
Shim
Used on NE-2C.
01-527-5522
Shim
Used on NE-2C.
01-527-5527
Shim
Used on NE-2C.
01-527-5633
Shim
Used on engine, rb211-535e4. next higher assembly, LJ75044
01-527-5872
Ring Spacer
Used on model 300 power pipe threader. thrust ring
01-527-5953
Ring Spacer
Used on assault amphibious vehicle 2350-01-080-9088. 3.560" inside diameter spacer-4.25 x 3.56id x .78lg-nylatron
01-527-6162
Sleeve Spacer
Used on fwd fuselag. 0.4638" overall length spacer, sleeve chromate surface treated 17c solid, plain, no outside flanges
01-527-6416
Straight Spacer
01-527-6434
Plate Spacer
Used on pump model txd2a, txsd2a. 3.250" overall length rv cover cast iron 125 non-circular w/bolt holes
01-527-6857
Machine Thread Plug
Used on howitzer, 155mm, m777e1. 2a internal thread class right-hand internal 0.460" overall length 14 internal thread quantity per inch unf internal thread series
01-527-6859
Machine Thread Plug
01-527-6884
Sleeve Spacer
Used on gse hv-22b and mv-22b. 0.0420" overall length 17c solid, plain, no outside flanges
01-527-6979
Sleeve Spacer
Used on fwd fuselog. 1.4950" overall length spacer, sleeve has no finish. use on screw or bolt dia 0f .1640 17c solid, plain, no outside flanges
01-527-6997
Sleeve Spacer
Used on 2410001859792 tractor,fulltracked,low speed,bulldozer. 17c solid, plain, no outside flanges
01-527-7147
Sleeve Spacer
Used on frick screw compressor model 283.
01-527-7166
Machine Thread Plug
01-527-7190
Sleeve Spacer
Used on model wcn18, large capacity washer. 0.9850" overall length 17c solid, plain, no outside flanges
01-527-7200
Shim
Used on c130j hercules. 1.250" overall length width is 1.0 in. square
01-527-7255
Plate Spacer
Used on F-15. 0.192" hole diameter 1.440" outside diameter 2 bolt hole quantity shim circular
01-527-7293
Nonmetallic Bushing
Used on 1.25x1-7 pump. gasket sleeve material is vinton; astm D1418 class fkm
01-527-7382
Sleeve Spacer
Used on fwdfuselag. 0.7026" overall length spacer, sleeve screw or bolt dia 0.250" chromate surface treated 17c solid, plain, no outside flanges
01-527-7434
Sleeve Spacer
Used on fwd fuselag. 0.1714" overall length spacer, sleeve screw or bolt dia 0.250" chromate surface treated 17c solid, plain, no outside flanges
01-527-7509
Sleeve Spacer
Used on foward fuselage. 0.4013" overall length chromate surface treated 17c solid, plain, no outside flanges
01-527-7518
Machine Thread Plug
Used on end item nsn: 2410-00-185-9792.
01-527-7565
Machine Thread Plug
Used on valves;section assy, 6x8x13 vna. plug, drain dimensions are 1 1/16-12un-2a
01-527-7700
Machine Thread Bushing
01-527-7713
Special Shaped Spacer
01-527-7772
Sleeve Spacer
Used on cable assy, inst.-wire harness cable installation center, aft,vertical. 0.6346" overall length anodize surface treated 17c solid, plain, no outside flanges
01-527-7850
Tolerance Ring
Used on drive conversion kit/ model 300 power pipe threader.
01-527-7881
Shim
Used on bonanza e24. shim, control columb
01-527-7882
Shim
Used on bonanza e24. shim, control arm
01-527-8486
Machine Thread Bushing
Used on fire control and bombing systems. right-hand 0.410" overall length 32 thread quantity per inch retainer, torque mtr 2 wrenching facility holes are opposite each other on a .550 dia passivate surface treated un thread series
01-527-8757
Tapered Ring Set
Used on steering group. tensioning set per manufacturer- it is not a pulley but a tension set or soemtimes called a taper-lock ring. the assembly has a pattern of bolts- as the bolts are tightened it pulls an inner ring tight around an axle or round shaft; the part is within the driving
01-527-8786
Shim
Used on end item: 1520-01-125-5476.
01-527-8845
Machine Thread Plug
01-527-8870
Sleeve Spacer
0.1980" overall length chemical film per mil-c-5541, class 1a, dyed blue anodize or chromate surface treated 17c solid, plain, no outside flanges
01-527-8896
Ring Spacer
Used on petroleum quality analysis system (paqs).
01-527-8900
Sleeve Spacer
Used on fwd fuselage;spacer,sleeve rivet. 0.5781" overall length navy:spacer, sleeve chromate dyed blue; rivet diameter 0.188 chromate surface treated 17c solid, plain, no outside flanges
01-527-8907
Sleeve Spacer
Used on F/A-15. 0.3950" overall length washer, precision 17c solid, plain, no outside flanges
