01-525-8931
Nonmetallic Bushing
01-525-9096
Special Shaped Spacer
01-525-9383
Plate Spacer
Used on heavyweight engine housing maint, stand. 0.405" hole diameter 4.500" overall length 2.250" overall width 6 bolt hole quantity shim, swivel fixture all measurements are taken after anodize finish; suface roughness- machined surfaces to be 125 underscore check mark in accordance with ansi/asme B46.1; center to center distance between bolt holes along length are not equal, one distance is 1.625 in, the second 1.375 in; the distance from the outside edge to bolt hole center along length is 0.500in anodize surface treated non-circular w/bolt holes
01-525-9864
Shim
Used on l-1011, tristar, aircraft.
01-526-0215
Machine Thread Plug
Used on 05k compressor; 10855 carrier. right-hand external includes o-ring unf external thread series
01-526-0385
Ring Spacer
0.260" inside diameter package qty (10) ; color , white; screw size 1/4"
01-526-0572
Plate Spacer
Used on p-3, orion, aircraft. spacer, emergency stores release mech.
01-526-0618
Retaining Instrument Ring
Used on 155lw howitzer.
01-526-0970
Special Shaped Spacer
01-526-0982
Sleeve Spacer
01-526-1261
Sleeve Spacer
01-526-1312
Special Shaped Spacer
01-526-2059
Sleeve Spacer
01-526-2226
Ring Spacer
Used on valve,ball .250 ips.
01-526-2279
Sleeve Spacer
Used on 2320-01-458-1207; truck tractor. 1.0000" overall length material is 48-00833 bar steel, round paint surface treated 17a split, plain, no outside flanges
01-526-2353
Sleeve Spacer
Used on centerline camera assy; ilarts system. 0.9370" overall length 17c-2 solid, plain, no outside flanges, interior flange (s) not located at either end
01-526-2826
Special Shaped Spacer
Spacer mounting, bracket 3) unequally spaced holes 0.297 dia thru: two tabs 1.68 in length
01-526-2828
Nonmetallic Bushing
01-526-2832
Nonmetallic Bushing
01-526-2847
Retaining Instrument Ring
01-526-2919
Sleeve Spacer
0.8010" overall length retainer, injector gear groove 0.188 in down side 0.60 rad. 17c-3 solid, plain, no outside flanges, internal flange at both ends
01-526-2925
Sleeve Spacer
Used on 4320-01-390-8214. spacer tube 6, 5X12X18 end item nsn 4320-01-390-8214, spacer tube 6, 5X12X18
01-526-2926
Sleeve Spacer
Used on 4320-01-390-8214. tube 6X8X14
01-526-2933
Sleeve Spacer
Used on 4320-01-390-8214. tube 1, 4X2X16
01-526-2935
Sleeve Spacer
Used on 4320-01-390-8214. spacer tube, 7X12X18
01-526-2943
Sleeve Spacer
Used on 4320-01-390-8214. rubber shell
01-526-2946
Sleeve Spacer
Used on 4320-01-390-8214. protection hose
01-526-2948
Sleeve Spacer
Used on 4320-01-390-8214. disc, 6.5X13X4.8
01-526-2949
Sleeve Spacer
Used on 4320-01-390-8214. DISC18, 5X37X5
01-526-3342
Shim
Used on tactical water purification system (twps) nsn 4610-01-488-9656. shim, mounting bail bar
01-526-3359
Machine Thread Bushing
Used on key duplication machine model 026.
01-526-3618
Sleeve Spacer
Used on tactical water purification system (twps) nsn 4610-01-488-9656.
01-526-3621
Sleeve Spacer
Used on tactical water purification system (twps) nsn 4610-01-488-9656.
01-526-3622
Sleeve Spacer
Used on tactical water purification system (twps) nsn 4610-01-488-9656.
01-526-3813
Shim
Used on tactical water purification sys (twps)4610-01-488-9656.
01-526-4081
Bushing Blank
Used on fighter aircraft (f18 e/f). 1.5000" overall length bushing, plain; navy: bushing, sleeve next higher assy is body, valve or valve, flow control 17c solid, plain, no outside flanges
01-526-4150
Sleeve Spacer
Used on 6135-01-485-3450. mpa sleeve
01-526-4154
Shim
Used on tactical water purification sys(twps)4610-01-488-9656.
01-526-4157
Machine Thread Plug
Used on 4820-01-526-1518; valve,check. plug - bronze
01-526-4164
Shim
Used on tactical water purification sys(twps)4610-01-488-9656.
01-526-4693
Machine Thread Plug
Used on wafer check valve. right-hand external 3.000" external thread length has solid square head npt external thread series
01-526-4695
Machine Thread Plug
Used on wafer check valve. right-hand external 4.000" external thread length has solid square head npt external thread series
01-526-4697
Machine Thread Plug
Used on wafer check valve. right-hand external 5.000" external thread length has solid square head npt external thread series
01-526-4698
Machine Thread Plug
Used on wafer check valve. right-hand external 10.000" external thread length has solid square head npt external thread series
01-526-4761
Machine Thread Plug
01-526-4937
Machine Thread Bushing
Used on valve ball combination hull & backup 3.00 ips.
01-526-4943
Machine Thread Bushing
Used on valve ball combination hull & backup 3.00 ips.
01-526-5047
Sleeve Spacer
Used on an/wld-1(v) mine hunting sys; vdsdr assy. 1.7500" overall length pull cable sleeve 22f hexagon shaped flange, external flange one end
01-526-5177
Tapered Spacer
Used on engine lathe. compound rest gib strip length is 8.66 in.
