01-496-0911
Plate Spacer
0.155" hole diameter 1.520" overall length 0.600" overall width 2 bolt hole quantity finish chemical coating mil-c-5541, ch 3 non-circular w/square corners
01-496-1093
Ring Spacer
Used on mbt 6 vent valve linkage;seawolf class ssn 23. 2.012" inside diameter
01-496-1104
Ring Spacer
Used on mbt 6 vent valve linkage;seawolf class ssn 23. 2.020" inside diameter
01-496-1301
Machine Thread Plug
0.072" overall length anodize surface treated
01-496-1302
Machine Thread Plug
0.097" overall length anodize surface treated
01-496-1335
Stepped Spacer
Used on hawkeye acft. flange, bushing
01-496-1591
Sleeve Spacer
Used on 2320-01-496-5579,front suspension. 4.0000" overall length spacer, tbg (for keeper bolt) 1/2" pipe x 4" 17c solid, plain, no outside flanges
01-496-1609
Plate Spacer
Used on 2320-01-496-5579,front suspension assembly. 9.0000" overall length 4.0000" overall width spacer, solid-between spring hole in center of plate
01-496-1970
Plate Spacer
Used on E-2C. 0.5460" hole diameter 3.6200" overall length 3.1600" overall width 2 bolt hole quantity shim-p.p. engine fwd mount on the 3.62 inch side there is a half circle with a 0.85 radius 1.81" from the end non-circular w/square corners
01-496-2139
Ring Spacer
Used on hh-60h aircraft.
01-496-2145
Plate Spacer
Used on f/a18-e/f.
01-496-2169
Straight Spacer
01-496-2260
Ring Spacer
Used on transmission gearbox assembly. 98.0mm inside diameter hardened steel material
01-496-2680
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.286" hole diameter 0.386" overall width non-circular w/square corners
01-496-2707
Externally Threaded Ring
01-496-2708
Sleeve Spacer
01-496-2886
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.286" hole diameter 48.000" overall length 0.386" overall width 38 bolt hole quantity navy) shim - gang channel non-circular w/square corners
01-496-2888
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.286" hole diameter 0.386" overall width non-circular w/square corners
01-496-2892
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.286" hole diameter 0.386" overall width non-circular w/square corners
01-496-2909
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.286" hole diameter 0.386" overall width non-circular w/square corners
01-496-2914
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.286" hole diameter 0.386" overall width non-circular w/square corners
01-496-2929
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.286" hole diameter 0.386" overall width non-circular w/square corners
01-496-2948
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.286" hole diameter 48.000" overall length 0.386" overall width 42 bolt hole quantity navy) shim - gang channel non-circular w/square corners
01-496-2961
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.286" hole diameter 48.000" overall length 0.386" overall width 34 bolt hole quantity navy) shim - gang channel non-circular w/square corners
01-496-2963
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.286" hole diameter 48.000" overall length 0.386" overall width 43 bolt hole quantity navy) shim - gang channel non-circular w/square corners
01-496-2967
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.286" hole diameter 0.386" overall width navy) shim - gang channel non-circular w/square corners
01-496-2973
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.356" hole diameter 48.000" overall length 0.486" overall width 28 bolt hole quantity navy) shim - gang channel non-circular w/square corners
01-496-2976
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.356" hole diameter 48.000" overall length 0.486" overall width 27 bolt hole quantity navy) shim - gang channel non-circular w/square corners
01-496-2977
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.356" hole diameter 48.000" overall length 0.486" overall width 25 bolt hole quantity navy) shim - gang channel non-circular w/square corners
01-496-2980
Machine Thread Plug
Used on air cartridge turbine engine starter;b-52. approximate od is 2" x 1 inch long plug, machine
01-496-2981
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.356" hole diameter 48.000" overall length 0.486" overall width 32 bolt hole quantity navy) shim - gang channel non-circular w/square corners
01-496-2982
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.356" hole diameter 48.000" overall length 0.486" overall width 34 bolt hole quantity navy) shim - gang channel non-circular w/square corners
01-496-2984
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.356" hole diameter 48.000" overall length 0.486" overall width 29 bolt hole quantity navy) shim - gang channel non-circular w/square corners
01-496-2998
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.356" hole diameter 48.000" overall length 0.486" overall width 25 bolt hole quantity (navy) shim - gang channel non-circular w/square corners
01-496-3001
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.356" hole diameter 48.000" overall length 0.486" overall width 22 bolt hole quantity (navy) shim - gang channel non-circular w/square corners
01-496-3004
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.356" hole diameter 48.000" overall length 0.486" overall width 42 bolt hole quantity (navy) shim - gang channel non-circular w/square corners
01-496-3005
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.356" hole diameter 48.000" overall length 0.486" overall width 38 bolt hole quantity (navy) shim - gang channel non-circular w/square corners
01-496-3007
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.356" hole diameter 48.000" overall length 0.486" overall width 34 bolt hole quantity (navy) shim - gang channel non-circular w/square corners
01-496-3013
Sleeve Spacer
Used on valve, seawolf class ssn. 0.3880" overall length phosphate surface treated 17c solid, plain, no outside flanges
01-496-3025
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.356" hole diameter 0.486" overall width non-circular w/square corners
01-496-3026
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.356" hole diameter 0.486" overall width non-circular w/square corners
01-496-3028
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.356" hole diameter 0.486" overall width non-circular w/square corners
01-496-3030
Shim
Used on cbil for c/d/; f/a-18e/f hornet aircraft. 0.356" hole diameter 0.486" overall width non-circular w/square corners
01-496-3112
Special Shaped Spacer
01-496-3238
Sleeve Spacer
