01-449-5428
Machine Thread Plug
01-449-5430
Machine Thread Plug
01-449-5431
Machine Thread Bushing
01-449-6282
Sleeve Spacer
1.3700" overall length anodize surface treated 17c solid, plain, no outside flanges
01-449-6789
Sleeve Spacer
01-449-6809
Tapered Spacer
0.100" overall length 0.800" overall width chromate surface treated rectangular
01-449-6915
Plate Spacer
Used on p/n 17p8d8400-1 inlet assy,engine;c17a acft. 0.306" hole diameter 4.500" overall length 1.000" overall width 2 bolt hole quantity there is one slotted hole, 0.500 in. lg, 0.300 in. wide, 0.620 in. distance of slotted hole centerline to nearest edge non-circular w/rounded ends
01-449-7011
Sleeve Spacer
1.7400" overall length 17c solid, plain, no outside flanges
01-449-7065
Plate Spacer
0.750" overall length 0.750" overall width rectangular
01-449-7069
Plate Spacer
0.750" overall length 0.750" overall width rectangular
01-449-7070
Plate Spacer
0.750" overall length 0.750" overall width rectangular
01-449-7071
Shim
0.750" overall length 0.750" overall width rectangular
01-449-7180
Sleeve Spacer
Used on patriot.
01-449-7306
Plate Spacer
Used on harpoon missile launch system. 2.000" overall length 1.000" overall width rectangular
01-449-7338
Plate Spacer
Used on F-15S. 0.780" overall length 0.500" overall width spacer, plate-one hole mounting hhole is not centered, it is .250 in. outside edge to hole center distance along the lgth non-circular w/o bolt holes
01-449-7600
Plate Spacer
0.540" outside diameter circular
01-449-7618
Machine Thread Plug
Used on mg506 marine transmission.
01-449-7757
Bushing Blank
Used on FD10. carrier bushing
01-449-7766
Plate Spacer
0.592" hole diameter 3.620" overall length 1.125" overall width 2 bolt hole quantity non-circular w/square corners
01-449-7770
Plate Spacer
0.654" hole diameter 4.500" overall length 1.344" overall width 2 bolt hole quantity non-circular w/square corners
01-449-7869
Externally Threaded Ring
01-449-8318
Plate Spacer
Used on F-15S. 0.840" overall length 0.500" overall width spacer, plate-one hole mounting ghole is not centered, it is .250 in. outside edge to hole center distance along the lgth non-circular w/o bolt holes
01-449-8341
Plate Spacer
1.000" overall length 0.960" overall width aperture is off center anodize surface treated non-circular w/o bolt holes
01-449-8442
Sleeve Spacer
3.2800" overall length 17c solid, plain, no outside flanges
01-449-8448
Special Shaped Spacer
01-449-8458
Shim
1.500" overall length 0.960" overall width non-circular w/o bolt holes
01-449-8521
Shim
1.500" overall length 0.820" overall width non-circular w/o bolt holes
01-449-8525
Special Shaped Spacer
01-449-8576
Sleeve Spacer
Used on patriot.
01-449-8632
Sleeve Spacer
0.5700" overall length 17c solid, plain, no outside flanges
01-449-9003
Special Shaped Spacer
Anodize surface treated
01-449-9030
Sleeve Spacer
Cadmium or chromate surface treated 17c solid, plain, no outside flanges
01-449-9127
Machine Thread Bushing
01-449-9291
Sleeve Spacer
01-449-9531
Sleeve Spacer
Used on chinook ch-47d helicopter.
01-449-9572
Shim
Used on c130-j acft. 0.218" hole diameter 5.710" overall length 1.090" overall width 3 bolt hole quantity thrid hole dia 0.260/0.267 in. spaced 4.700 in apart between frist hole non-circular w/corner radius
01-449-9927
Sleeve Spacer
01-449-9928
Sleeve Spacer
