01-398-8729
Special Shaped Spacer
01-398-8753
Special Shaped Spacer
2 bolt hole quantity N0minal center to center distance between bolt holes along length is 3.500"; distance from outside edge to bolt hole center along length is 0.500"; distance from outside edge to bolt hole center along width is 1.000"; two outside corners along width are square
01-398-8759
Sleeve Spacer
0.5950" overall length passivate surface treated 17c solid, plain, no outside flanges
01-398-8765
Ring Spacer
0.440" inside diameter
01-398-8767
Sleeve Spacer
0.3050" overall length 17c solid, plain, no outside flanges
01-398-9129
Machine Thread Plug
3a external thread class right-hand external 0.250" external thread length 0.830" overall length 18 external thread quantity per inch C43 plug, tube fitting flareless (note: drilled hole is optional should not be considered as a separating characteristic) unf external thread series
01-398-9446
Special Shaped Spacer
01-398-9492
Special Shaped Spacer
2 bolt hole quantity spacer has rounded ends; two bolt holes have different diameters
01-398-9496
Sleeve Spacer
01-398-9499
Tapered Spacer
1.100" overall length 0.800" overall width minor height is chamfered 45 degrees in two places rectangular
01-398-9500
Shim Set
2 shims 0.032 ins thk 0.768 od 0.636 id; 3 shims 0.010 ins thk 0.768 od 0.636 id; 2 shims 0.005 ins thk 0.768 od 0.636 id
01-398-9501
Sleeve Spacer
01-398-9534
Tapered Bushing
1.187" inside diameter 0.963" overall length cadmium surface treated
01-398-9536
Shim
0.620" outside diameter circular
01-398-9537
Plate Spacer
0.177" hole diameter 1.250" overall length 0.937" overall width 2 bolt hole quantity anodize surface treated non-circular w/square corners
01-398-9606
Special Shaped Spacer
01-398-9611
Externally Threaded Ring
01-398-9613
Externally Threaded Ring
01-398-9704
Tapered Bushing
01-398-9815
Lock Serrated Ring
Used on trash ejector assy.
01-398-9873
Machine Thread Bushing
Used on trash ejector assy.
01-399-0130
Ring Spacer
Used on turbocharger, p/n 103-7290, board 110 ft. wpb coast guard vessels. 15.000" inside diameter exhaust gasket, non-asbestos-filler d. j. ring gasket, stainless, mfr no. djnaf
01-399-0136
Ring Spacer
1.060" inside diameter spacer is chamfered 0.035 " on one end
01-399-0173
Machine Thread Bushing
Right-hand 1.690" overall length 18 thread quantity per inch unjf thread series
01-399-0193
Shim
0.307" outside diameter circular
01-399-0390
Special Shaped Spacer
01-399-0420
Sleeve Spacer
0.3200" overall length passivate surface treated 17c solid, plain, no outside flanges
01-399-0440
Sleeve Spacer
1.3000" overall length 17c solid, plain, no outside flanges
01-399-0447
Plate Spacer
5.190" overall length 2.500" overall width 2 bolt hole quantity bolt holes are slots rather than round; bolt holes have width of 0.281" non-circular w/square corners
01-399-0453
Sleeve Spacer
01-399-0458
Special Shaped Spacer