And Spacers Shims Rings Bushings FSG 53 — FSC 5365

NSN
NIIN
Name
Details
01-396-4319
Sleeve Spacer
1.7500" overall length one slot on left side; width of 1.0000 in.; length of 0.5600 in.; two right corners of slot are chamfered. 17c solid, plain, no outside flanges
01-396-4333
Shim
0.280" hole diameter 2.632" overall width 2 bolt hole quantity non-circular w/o aperture
01-396-4713
Ring Spacer
01-396-4769
Shim
01-396-5271
Sleeve Spacer
0.9950" overall length anodize surface treated 22c solid, external flange one end
01-396-5273
Sleeve Spacer
1.1510" overall length anodize surface treated 22c solid, external flange one end
01-396-5274
Sleeve Spacer
0.9310" overall length anodize surface treated 22c solid, external flange one end
01-396-5276
Shim
01-396-5279
Shim
01-396-5280
Ring Spacer
01-396-5283
Ring Spacer
01-396-5301
Sleeve Spacer
0.5620" overall length passivate surface treated 17c solid, plain, no outside flanges
01-396-5305
Shim Set
01-396-5651
Sleeve Spacer
Used on bulldozer blade model m113a2.
01-396-5879
Machine Thread Bushing
01-396-5889
Machine Thread Plug
2a external thread class right-hand external plug, machine unf external thread series
01-396-5890
Machine Thread Plug
2a external thread class right-hand external plug, machine unf external thread series
01-396-6210
Tapered Bushing
01-396-7249
Plate Spacer
0.116" hole diameter 2.268" outside diameter 4 bolt hole quantity passivate surface treated circular
01-396-7250
Sleeve Spacer
0.3200" overall length passivate surface treated 17c solid, plain, no outside flanges
01-396-7252
Sleeve Spacer
0.3200" overall length passivate surface treated 17c solid, plain, no outside flanges
01-396-7254
Ring Spacer
01-396-7305
Sleeve Spacer
6.4400" overall length 17c solid, plain, no outside flanges
01-396-7307
Sleeve Spacer
0.9720" overall length 17c-3 solid, plain, no outside flanges, internal flange at both ends
01-396-7456
Plate Spacer
01-396-7493
Shim
01-396-7997
Machine Thread Plug
2a external thread class right-hand external 0.418" external thread length 2.340" overall length 12 external thread quantity per inch plug, tube fitting flared (note: drilled hole is optional should not be considered as a separating characteristic un external thread series
01-396-8022
Shim
4.750" overall length 1.600" overall width rectangular
01-396-8028
Shim
4.750" overall length 1.340" overall width rectangular
01-396-8071
Machine Thread Plug
2a external thread class right-hand external 0.190" external thread length 0.380" overall length plug, machine unc external thread series
01-396-8075
Plate Spacer
0.168" hole diameter 2.750" outside diameter 4 bolt hole quantity circular
01-396-8077
Shim
01-396-8078
Shim
01-396-8084
Shim
01-396-8085
Shim
01-396-8088
Bushing Blank
01-396-8277
Externally Threaded Ring
01-396-8375
Bushing Blank
5.50mm overall length 17e blank, plain, no outside flanges
01-396-8381
Sleeve Spacer
0.6250" overall length 17c solid, plain, no outside flanges
01-396-8393
Sleeve Spacer
0.1750" overall length passivate surface treated 17c solid, plain, no outside flanges
01-396-8440
Bushing Blank
5.8330" overall length 17c solid, plain, no outside flanges
01-396-8443
Bushing Blank
6.0000" overall length 17c solid, plain, no outside flanges
01-396-8485
Nonmetallic Bushing
01-396-8489
Sleeve Spacer
0.4300" overall length 17c solid, plain, no outside flanges
01-396-8497
Ring Spacer
01-396-8779
Plate Spacer
Used on actuator,electro-mechanical,rotary-nsn 1680-01-117-1331.
01-396-8823
Shim Set
Used on elevator trim tab screw jack a487-3 and a487-4. G1 459-57-4 0.005 in shim, 2 459-57-2 0.008 in shims, 2 459-57-3 0.003 in shims, 2 459-57-4 0.002 in shins; shims are 2.00 in od by 1.75 in id; black oxide protective treatment; low carbon cold rolled steel
01-396-8967
Connecting Round Ring
01-396-9128
Machine Thread Plug
Plug shall be in accordance with requirements for source control dwg 11627748-26 cadmium surface treated
01-396-9153
Externally Threaded Ring
3a thread class right-hand 0.200" overall length 1.050" bore diameter