01-386-2913
Plate Spacer
54.000" overall length 1.900" overall width rectangular
01-386-2914
Plate Spacer
19.200" overall length 1.500" overall width rectangular
01-386-3487
Sleeve Spacer
20.00mm overall length 17c solid, plain, no outside flanges
01-386-3488
Nonmetallic Bushing
0.490" overall length 0.510" center hole diameter matl is neoprene rubber per mil-r-6855 round flanged
01-386-3512
Nonmetallic Bushing
1.330" overall length 0.750" center hole diameter
01-386-3521
Sleeve Spacer
6.1600" overall length passivate surface treated 22c-1 solid, external flange one end, internal flange one end
01-386-3529
Ring Spacer
0.128" inside diameter
01-386-3533
Ring Spacer
0.256" inside diameter chromate surface treated
01-386-3567
Machine Thread Plug
0.750" external thread length 0.550" overall length zinc surface treated plug, machine
01-386-3574
Nonmetallic Bushing
27.5mm overall length 16.0mm center hole diameter round flanged
01-386-3577
Sleeve Spacer
0.4325" overall length 17c solid, plain, no outside flanges
01-386-3584
Sleeve Spacer
0.1250" overall length 17c solid, plain, no outside flanges
01-386-3659
Sleeve Spacer
0.3800" overall length 17c solid, plain, no outside flanges
01-386-3823
Nonmetallic Bushing
0.550" overall length 0.251" center hole diameter round flanged
01-386-3917
Sleeve Spacer
Used on dt-565(a).
01-386-3932
Ring Spacer
41.0mm inside diameter
01-386-3950
Plate Spacer
17.4mm hole diameter 210.0mm overall length 178.0mm overall width 8 bolt hole quantity four holes each side along the length; 90.0 deg bend at top, 65.0 mm long, 10.0 deg radius at the bend non-circular w/bolt holes
01-386-3962
Ring Spacer
13.0mm inside diameter
01-386-3967
Sleeve Spacer
0.3850" overall length anodize surface treated 22c solid, external flange one end
01-386-5199
Sleeve Spacer
0.6250" overall length 17c solid, plain, no outside flanges
01-386-5258
Machine Thread Plug
01-386-5374
Sleeve Spacer
Used on targets, surface to air missiles.
01-386-5820
Machine Thread Plug
01-386-5826
Machine Thread Bushing
01-386-5924
Machine Thread Bushing
Used on mount,machine gun,mk93,mod 1. right-hand 0.640" overall length 14 thread quantity per inch oxide surface treated unf thread series
01-386-6013
Shim
0.200" hole diameter 2.380" overall length 2.380" overall width 4 bolt hole quantity non-circular w/bolt holes
01-386-6030
Special Shaped Spacer
0.626" inside diameter flange diameter is 1.250
01-386-6031
Shim
3.000" overall length 1.250" overall width rectangular
01-386-6062
Machine Thread Plug
3a external thread class right-hand external 0.480" overall length 18 external thread quantity per inch plug, machine unc external thread series
01-386-6085
Plate Spacer
0.437" hole diameter 3.000" overall length 1.250" overall width 2 bolt hole quantity non-circular w/square corners
01-386-6424
Plate Spacer
9.0mm hole diameter 25.0mm overall length 100.0mm overall width 2 bolt hole quantity non-circular w/square corners
01-386-6469
Machine Thread Bushing
01-386-6492
Sleeve Spacer
3.9400" overall length has 8 equally spaced bolt holes; each has a diameter 0f 0.7870" 17c solid, plain, no outside flanges
01-386-6760
Plate Spacer
11.0mm hole diameter 110.0mm overall length 50.0mm overall width 2 bolt hole quantity non-circular w/square corners
01-386-6763
Plate Spacer
0.200" hole diameter 2.380" overall length 2.380" overall width 4 bolt hole quantity passivate surface treated non-circular w/bolt holes
01-386-6772
Shim
0.550" hole diameter 16.937" outside diameter 12 bolt hole quantity circular
01-386-6775
Sleeve Spacer
01-386-6778
Sleeve Spacer
01-386-6780
Ring Spacer
0.515" inside diameter
01-386-6960
Plate Spacer
Used on joint tactical information distribution system.
01-386-6989
Sleeve Spacer
Used on cf-18 aircraft. heat treat 4
01-386-7593
Sleeve Spacer
01-386-7838
Sleeve Spacer
10.9400" overall length groove along center of spacer sleeve; groove has a width of 0.3800 in. 17c solid, plain, no outside flanges
01-386-8177
Tapered Bushing
0.3125" inside diameter 0.600" overall length passivate surface treated
