01-293-7962
Plate Spacer
0.286" hole diameter 72.000" overall length 0.386" overall width 47 bolt hole quantity non-circular w/square corners
01-293-7963
Plate Spacer
Used on helicopter,united technologies corporation,sikorsky aircraft divison. 0.228" hole diameter 1.750" overall length 1.750" overall width 4 bolt hole quantity 1125.0 microinches all over except as noted, sikorsky specification SS5100 shall appy for all holes unless otherwise indicated, areas of transition shall conform to that specified for the roughest adjacent finish area unless otherwise indicated anodize surface treated non-circular w/bolt holes
01-293-7964
Plate Spacer
0.281" hole diameter 4.620" overall width 4 bolt hole quantity additional material aluminum alloy 7072 paint surface treated non-circular w/aperture
01-293-7974
Sleeve Spacer
01-293-7990
Machine Thread Plug
Used on part number 3930011580849 trac international company. plug, machine
01-293-8000
Stepped Spacer
0.835" overall length 3 unequally spaced through holes 0.200 in. min 0.210 in. max dia counterbored to 0.320 in. min 0.330 in. max dia by 0.210 in. min 0.230 in. max deep; furnished with 3 MS21209F1-15l inserts
01-293-8779
Shim
Used on helicopter,united technologies corporation,sikorsky aircraft division. 0.098" hole diameter 4 bolt hole quantity used for the installation of radius block, must have the smallest gap between radius block non-circular w/bolt holes
01-293-8780
Plate Spacer
44.75mm hole diameter 1129.0mm overall length 63.0mm overall width 1 bolt hole quantity
01-293-8781
Plate Spacer
0.373" hole diameter 6.500" overall length 3.000" overall width 2 bolt hole quantity non-circular w/square corners
01-293-8843
Machine Thread Plug
01-293-9020
Nonmetallic Bushing
01-293-9021
Machine Thread Bushing
Right-hand 1.250" overall length 18 thread quantity per inch wrenching head has two holes with a 0.234 inch diameter passivate surface treated unef thread series
01-293-9025
Ring Spacer
1.427" inside diameter passivate surface treated
01-293-9493
Shim
Used on 1440-01-087-9844.
01-293-9497
Bushing Blank
01-293-9558
Plate Spacer
Used on helicopter,united technologies corporation,sikorski aircraft division. 0.098" hole diameter 2.700" outside diameter 8 bolt hole quantity circular
01-293-9568
Sleeve Spacer
1.2450" overall length sleeve has an elongated flange, 0.9850" long, 0.3960" wide; two bolt holes 0.0980inches diameter located 0.3430" from center of inside diameter to center of either bolt hole chromate surface treated
01-293-9569
Sleeve Spacer
0.4325" overall length 17c solid, plain, no outside flanges
01-293-9607
Sleeve Spacer Set
01-293-9626
Externally Threaded Ring
01-293-9629
Nonmetallic Bushing
01-293-9631
Ring Spacer
0.627" inside diameter passivate surface treated
01-293-9831
Sleeve Spacer
01-294-0225
Sleeve Spacer
01-294-0809
Sleeve Spacer
0.1600" overall length 17c solid, plain, no outside flanges
01-294-1582
Sleeve Spacer
01-294-1736
Sleeve Spacer
0.1750" overall length 17c solid, plain, no outside flanges
01-294-1737
Sleeve Spacer
0.1250" overall length 17c solid, plain, no outside flanges
01-294-1738
Sleeve Spacer
0.3750" overall length 17c solid, plain, no outside flanges
01-294-1973
Shim
10.500" overall length 3.938" overall width rectangular
01-294-1974
Shim
10.375" overall length 1.000" overall width rectangular
01-294-2145
Special Shaped Spacer
1.326" inside diameter has internal flange with length of 1.326 in., length of 1.346 in., width of 0.565 in.and width of 0.585 in.
01-294-2146
Special Shaped Spacer
1.326" inside diameter has internal flange with length of 1.326 in., length of 1.346 in., width of 0.565 in.
01-294-2147
Special Shaped Spacer
1.326" inside diameter has internal flange with length of 1.326in., length of 1.346 in., width of 0.565 in.
01-294-2148
Special Shaped Spacer
1.326" inside diameter has internal flange with length of 1.326 in., length of 1.346 in., width of 0.565 in.
