01-250-3324
Shim
0.624" outside diameter circular
01-250-3325
Plate Spacer
0.199" hole diameter 6.880" overall length 0.800" overall width 4 bolt hole quantity slightly curved along length
01-250-3326
Plate Spacer
0.098" hole diameter 2.514" overall length 0.680" overall width cadmium surface treated non-circular w/o radius
01-250-3354
Sleeve Spacer
01-250-3355
Sleeve Spacer
01-250-3357
Sleeve Spacer
1.1356" overall length gray anodize or blue chromate anodize or chromate surface treated 17c solid, plain, no outside flanges
01-250-3359
Sleeve Spacer
0.2340" overall length color black anodize surface treated 17c solid, plain, no outside flanges
01-250-3360
Sleeve Spacer
0.2340" overall length color black anodize surface treated 17c solid, plain, no outside flanges
01-250-3361
Bushing Blank
01-250-3727
Sleeve Spacer
01-250-4085
Shim
Used on outer guide-mtg frame,p/n 44300-139; t/h. 0.776" hole diameter 5.970" overall length 1.720" overall width 3 bolt hole quantity non-circular w/square corners
01-250-4654
Shim
0.810" outside diameter circular
01-250-4655
Shim
0.624" outside diameter circular
01-250-4656
Shim
0.624" outside diameter circular
01-250-4664
Bushing Blank
01-250-5287
Plate Spacer
Used on reducer assy p/n 8210010-401,b-1b. 1.000" outside diameter passivate surface treated circular
01-250-5289
Plate Spacer
0.098" hole diameter 0.682" overall length 0.315" overall width color, gray anodize surface treated non-circular w/rounded corners
01-250-5290
Plate Spacer
0.066" hole diameter 3.390" outside diameter 16 bolt hole quantity 16 holes countersunk 100 degrees nom by 0.110 in. min, 0.120 in. max dia anodize surface treated circular
01-250-5317
Sleeve Spacer
Used on 3rd generation gyro. 0.0300" overall length 32.0 microin. finish 17c solid, plain, no outside flanges
01-250-5319
Sleeve Spacer
0.5938" overall length left end surface of flange is grooved 0.2500 in. deep, 0.4170 in. wide 22c solid, external flange one end
01-250-5320
Sleeve Spacer
0.1100" overall length anodize or chromate surface treated 17c solid, plain, no outside flanges
01-250-5321
Sleeve Spacer
01-250-5439
Machine Thread Plug
01-250-5440
Machine Thread Plug
01-250-5652
Dee Ring
Furnished with clip
01-250-5653
Externally Threaded Ring
01-250-5689
Ring Spacer
0.710" inside diameter
01-250-6034
Plate Spacer
0.422" hole diameter 4.780" overall length 1.530" overall width 3 bolt hole quantity non-circular w/rounded ends
01-250-6035
Plate Spacer
0.422" hole diameter 4.030" overall length 1.780" overall width 2 bolt hole quantity non-circular w/rounded ends
01-250-6267
Machine Thread Plug
01-250-6268
Machine Thread Plug
01-250-6310
Shim
Circular
01-250-6314
Plate Spacer
0.218" hole diameter 2.000" overall length 1.300" overall width 2 bolt hole quantity
01-250-6315
Plate Spacer
1.000" overall length 0.500" overall width 3 bolt hole quantity center bolt hole 0.220 in. min, 0.226 in. max; 2 countersunk bolt holes on each end non-circular w/square corners
01-250-6325
Sleeve Spacer
01-250-6349
Externally Threaded Ring
3a thread class right-hand
01-250-6350
Machine Thread Bushing
Right-hand 1.840" overall length 20 thread quantity per inch hex wrenching facility has 2 lockwire holes 0.047 in. dia unjf thread series
01-250-6650
Shim
Used on 4920-01-198-0052.
01-250-6803
Sleeve Spacer
0.1880" overall length
