01-248-7088
Plate Spacer
0.220" hole diameter 2.000" outside diameter 4 bolt hole quantity one side countersunk 90 degrees, 1.510 in. dia passivate surface treated circular
01-248-7147
Sleeve Spacer
0.4012" overall length finish dyed iridescent bronze cadmium surface treated 17c solid, plain, no outside flanges
01-248-7148
Sleeve Spacer
0.9169" overall length dyed to an iridescent bronze color cadmium surface treated 17c solid, plain, no outside flanges
01-248-7724
Plate Spacer
Used on 2320008735407. 0.405" hole diameter 2.120" overall length 1.000" overall width 2 bolt hole quantity non-circular w/square corners
01-248-8396
Shim
Used on launch control system. 0.212" hole diameter 20.850" overall length 1.600" overall width 7 bolt hole quantity holes placed along lg at 0.750 in., 6.130 in., 12.130 in., 18.380 in.; last hole 0.782 from width edge
01-248-8723
Nonmetallic Bushing
01-248-9632
Plate Spacer
0.500" hole diameter 0.940" overall width 2 bolt hole quantity non-circular w/square corners
01-248-9947
Stepped Spacer
1/4 inch swage spacer tin alloy surface treated
01-249-0977
Sleeve Spacer
01-249-1807
Tapered Bushing
01-249-1954
Sleeve Spacer
01-249-2209
Externally Threaded Ring
Used on t.o. 4s1-120-4,fig 3,index 127. 280000 to 300000 psi per PS15296; temper etch per PS21205
01-249-2227
Shim
Used on sheave pin,p/n 44300-138. 2.860" outside diameter circular w/slots w/o bolt holes
01-249-2228
Shim
Used on upper structure p/n 44300-129. 7.950" overall length 2.950" overall width rectangular
01-249-2234
Sleeve Spacer
Used on hyd test stand; flowmeter assy; t.o. 33d2-5-36-54.
01-249-2235
Sleeve Spacer
Used on boom instl-leading edge flap rwr antenna. 1.7500" overall length 2 slots on 1 edge, 180.0 deg apart, 0.80 in. w by 0.60 in dp 17c solid, plain, no outside flanges
01-249-2834
Sleeve Spacer
01-249-2890
Sleeve Spacer
01-249-3608
Machine Thread Plug
01-249-3609
Machine Thread Plug
01-249-3686
Plate Spacer
0.406" hole diameter 4.380" overall length 1.620" overall width 2 bolt hole quantity chromate surface treated non-circular w/beveled corners
01-249-3728
Plate Spacer
0.344" hole diameter 2.500" overall length 1.120" overall width 2 bolt hole quantity cadmium surface treated non-circular w/square corners
01-249-3739
Sleeve Spacer
0.1250" overall length tin alloy surface treated 17c solid, plain, no outside flanges
01-249-3740
Sleeve Spacer
0.2400" overall length chromate surface treated 17c solid, plain, no outside flanges
01-249-3742
Sleeve Spacer
0.1100" overall length 17c solid, plain, no outside flanges
01-249-3800
Machine Thread Plug
01-249-3931
Ring Spacer
4.345" inside diameter
01-249-4265
Shim
0.108" hole diameter 3 bolt hole quantity chromate surface treated
01-249-4268
Shim
0.097" hole diameter 1.300" overall length 1.250" overall width 2 bolt hole quantity end opposite mtg holes with bend 0.250 in. radius 0.330 in. lg non-circular w/square corners
01-249-4271
Plate Spacer
0.193" hole diameter 2 bolt hole quantity countersunk hole in lower half of plate 0.260 min, 0.267 max by 100 degrees
01-249-4272
Plate Spacer
0.190" hole diameter 2.110" overall length 1.020" overall width 2 bolt hole quantity 2 bottom corners are chamfered
01-249-4273
Plate Spacer
0.150" hole diameter 3.400" overall length 0.600" overall width 2 bolt hole quantity chromate surface treated non-circular w/square corners
01-249-4313
Sleeve Spacer
17c solid, plain, no outside flanges
01-249-4314
Sleeve Spacer
4.0000" overall length chromate surface treated 17c-1 solid, plain, no outside flanges, internal flange one end
01-249-4315
Sleeve Spacer
0.8250" overall length passivate surface treated 17c solid, plain, no outside flanges
